6 material differences · fewer than 12

Tractor oneBOLINDER-MUNKTELL BM-41939–1944No measured PTO figureTractor twoFahr D 2701954–1958No measured PTO figure

Which should you choose?

Read our verdict on the BM-4 and the D 270 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

6 material differences · 2 fields identical or within 5%, which is not counted as material

BOLINDER-MUNKTELL BM-4 and Fahr D 270, field by field
FieldBM-4D 270Gap
Engine
Engine power, claimed claimed31.5 hp31.6 hp—
Engine declared—KHD F2L 514—
Displacement declared—2.66 L—
Maximum torque declared—101 lb·ft · 137 N·m—
Transmission
Top speed declared9.3 mph · 15 km/h12.1 mph · 19.4 km/h+29% D 270
Hydraulics & hitch
Pressure declared—3,129 psi · 216 bar—
Rear PTO speeds declared610 rpm572 rpmdiffers
Weight & dimensions
Unladen weight declared5,181 lb · 2,350 kg4,277 lb · 1,940 kg+21% BM-4
Maximum permissible mass declared—6,856 lb · 3,110 kg—
Wheelbase declared75.0 in · 1,905 mm78.7 in · 2,000 mm—
Length declared137.0 in · 3,480 mm120.5 in · 3,060 mm+14% BM-4
Width declared66.9 in · 1,700 mm62.5 in · 1,588 mm+7% BM-4
Ground clearance declared15.7 in · 400 mm14.2 in · 360 mm+11% BM-4
Turning radius, braked declared—10.0 ft · 3.05 m—
Fuel tank declared—54.9 qt · 52 L—

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

BOLINDER-MUNKTELL BM-4 sources

Source
  • Source: Traktorenlexikon, “Bolinder-Munktell BM 4”

Fahr D 270 sources

Source
  • Source: Traktorenlexikon, “Fahr D 270”