BOLINDER-MUNKTELL BM-35/BM-36 vs Nuffield PM-4

6 material differences · fewer than 12

Tractor one

1952–1959

No measured PTO figure

Tractor two

1951–1957

No measured PTO figure

Which should you choose?

Read our verdict on the BM-35/BM-36 and the PM-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

6 material differences · 7 fields identical or within 5%, which is not counted as material

BOLINDER-MUNKTELL BM-35/BM-36 and Nuffield PM-4, field by field
Field	BM-35/BM-36	PM-4	Gap
Engine
Engine power, claimed claimed	42.0 hp	48.0 hp	+14% PM-4
Engine declared	BOLINDER-MUNKTELL 1053	MORRIS-COMMERCIAL 38 T/V	differs
Displacement declared	3.36 L	3.77 L	+12% PM-4
Maximum torque declared	152 lb·ft · 206 N·m	148 lb·ft · 200 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	17.4 mph · 28 km/h	+7% BM-35/BM-36
Clutch declared	—	Pedal-operated dry single-plate clutch	—
Hydraulics & hitch
Pump flow declared	6.3 gpm · 23.8 L/min	7.2 gpm · 27.3 L/min	+15% PM-4
Pressure declared	1,276 psi · 88 bar	—	—
Three-point lift at ends declared	1,874 lb · 850 kg	—	—
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	5,401 lb · 2,450 kg	4,546 lb · 2,062 kg	+19% BM-35/BM-36
Wheelbase declared	77.2 in · 1,960 mm	78.0 in · 1,981 mm	—
Length declared	124.0 in · 3,150 mm	121.5 in · 3,086 mm	—
Width declared	66.5 in · 1,690 mm	69.0 in · 1,753 mm	—
Height declared	83.9 in · 2,130 mm	80.7 in · 2,051 mm	—
Ground clearance declared	20.7 in · 525 mm	17.0 in · 432 mm	+22% BM-35/BM-36
Turning radius, braked declared	11.2 ft · 3.40 m	—	—
Fuel tank declared	68.7 qt · 65.0 L	67.2 qt · 63.6 L	—

Source

Source