BOLINDER-MUNKTELL BM-35/BM-36 vs International Harvester W-6
8 material differences · fewer than 12
Which should you choose?
Read our verdict on the BM-35/BM-36 and the W-6 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | BM-35/BM-36 | W-6 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 42.0 hp | 36.5 hp | +15% BM-35/BM-36 |
| Engine declared | BOLINDER-MUNKTELL 1053 | INTERNATIONAL HARVESTER C-248 | differs |
| Displacement declared | 3.36 L | 4.06 L | +21% W-6 |
| Maximum torque declared | 152 lb·ft · 206 N·m | — | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 14.3 mph · 23 km/h | +30% BM-35/BM-36 |
| Clutch declared | — | Pedal operated dry Rockford single plate clutch type 11 inch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 6.3 gpm · 23.8 L/min | — | — |
| Pressure declared | 1,276 psi · 88 bar | — | — |
| Three-point lift at ends declared | 1,874 lb · 850 kg | — | — |
| Rear PTO speeds declared | 540 rpm | 537 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,401 lb · 2,450 kg | 4,830 lb · 2,191 kg | +12% BM-35/BM-36 |
| Wheelbase declared | 77.2 in · 1,960 mm | 76.0 in · 1,930 mm | — |
| Length declared | 124.0 in · 3,150 mm | 124.4 in · 3,159 mm | — |
| Width declared | 66.5 in · 1,690 mm | 63.0 in · 1,600 mm | +6% BM-35/BM-36 |
| Height declared | 83.9 in · 2,130 mm | 90.7 in · 2,305 mm | +8% W-6 |
| Ground clearance declared | 20.7 in · 525 mm | — | — |
| Turning radius, braked declared | 11.2 ft · 3.40 m | — | — |
| Fuel tank declared | 68.7 qt · 65.0 L | 84.0 qt · 79.5 L | +22% W-6 |
BOLINDER-MUNKTELL BM-35/BM-36 sources
Source
- Source: Traktorenlexikon, “Bolinder-Munktell BM 35/36”
International Harvester W-6 sources
Source
- Source: Traktorenlexikon, “McCormick W-6”
- Source: Traktorenlexikon, “McCormick Farmall-M”