BOLINDER-MUNKTELL BM-35/BM-36 vs International Harvester 353

12 material differences

Tractor one

1952–1959

No measured PTO figure

Tractor two

1967–1972

No measured PTO figure

Which should you choose?

Read our verdict on the BM-35/BM-36 and the 353 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 3 fields identical or within 5%, which is not counted as material

BOLINDER-MUNKTELL BM-35/BM-36 and International Harvester 353, field by field
Field	BM-35/BM-36	353	Gap
Engine
Engine power, claimed claimed	42.0 hp	34 hp	+25% BM-35/BM-36
Engine declared	BOLINDER-MUNKTELL 1053	INTERNATIONAL-HARVESTER D-155	differs
Displacement declared	3.36 L	2.54 L	+33% BM-35/BM-36
Maximum torque declared	152 lb·ft · 206 N·m	108 lb·ft · 146 N·m	+41% BM-35/BM-36
Transmission
Top speed declared	18.6 mph · 30 km/h	12.4 mph · 20 km/h	+50% BM-35/BM-36
Hydraulics & hitch
Pump flow declared	6.3 gpm · 23.8 L/min	6.9 gpm · 26.2 L/min	+10% 353
Pressure declared	1,276 psi · 88 bar	3,553 psi · 245 bar	+178% 353
Three-point lift at ends declared	1,874 lb · 850 kg	—	—
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	5,401 lb · 2,450 kg	4,577 lb · 2,076 kg	+18% BM-35/BM-36
Maximum permissible mass declared	—	7,584 lb · 3,440 kg	—
Wheelbase declared	77.2 in · 1,960 mm	77.4 in · 1,965 mm	—
Length declared	124.0 in · 3,150 mm	133.5 in · 3,390 mm	+8% 353
Width declared	66.5 in · 1,690 mm	59.2 in · 1,504 mm	+12% BM-35/BM-36
Height declared	83.9 in · 2,130 mm	85.8 in · 2,180 mm	—
Ground clearance declared	20.7 in · 525 mm	14.6 in · 372 mm	+41% BM-35/BM-36
Turning radius, braked declared	11.2 ft · 3.40 m	9.9 ft · 3.02 m	+13% BM-35/BM-36
Fuel tank declared	68.7 qt · 65.0 L	63.4 qt · 60.0 L	+8% BM-35/BM-36

Source

Source