13 material differences
Tractor oneBOLINDER-MUNKTELL BM-311949–1957No measured PTO figureTractor twoHanomag R 35 B1953–1957No measured PTO figure
Which should you choose?
Read our verdict on the BM-31 and the R 35 B → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
13 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | BM-31 | R 35 B | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 34 hp | 34.3 hp | — |
| Engine declared | AB-VOLVO D 4 F | Hanomag D 28 | differs |
| Displacement declared | 3.46 L | 2.80 L | +23% BM-31 |
| Maximum torque declared | 134 lb·ft · 182 N·m | 99 lb·ft · 134 N·m | +36% BM-31 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 11.4–15.7 mph · 18.3–25.2 km/h | differs |
| Clutch declared | pedal-operated dry single-disc clutch | Single-plate dry clutch from Fichtel & Sachs | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 6.3 gpm · 23.8 L/min | 4.2 gpm · 16.0 L/min | +49% BM-31 |
| Pressure declared | 1,276 psi · 88 bar | — | — |
| Rear PTO speeds declared | 540 rpm | 1615 | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,060 lb · 2,295 kg | 3,880 lb · 1,760 kg | +30% BM-31 |
| Wheelbase declared | 77.2 in · 1,960 mm | 70.9 in · 1,800 mm | +9% BM-31 |
| Length declared | 122.6 in · 3,115 mm | 110.6 in · 2,810 mm | +11% BM-31 |
| Width declared | 72.4 in · 1,839 mm | 65.0 in · 1,650 mm | +11% BM-31 |
| Ground clearance declared | 16.5 in · 420 mm | 14.2 in · 360 mm | +17% BM-31 |
| Turning radius, braked declared | — | 10.2 ft · 3.10 m | — |
| Fuel tank declared | 63.4 qt · 60.0 L | 47.6 qt · 45 L | +33% BM-31 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
BOLINDER-MUNKTELL BM-31 sources
Source
- Source: Traktorenlexikon, “Bolinder-Munktell BM 31”
Hanomag R 35 B sources
Source
- Source: Traktorenlexikon, “Hanomag R 35 B”