BOLINDER-MUNKTELL 320 Buster vs John Deere 60
8 material differences · fewer than 12
Which should you choose?
Read our verdict on the 320 Buster and the 60 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | 320 Buster | 60 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 36.5 hp | 36.9 hp | — |
| Engine declared | PERKINS D-913 | — | — |
| Displacement declared | 2.50 L | — | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 11.0 mph · 17.7 km/h | +41% 320 Buster |
| Clutch declared | — | Pedal-operated dry single-plate clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 7.4 gpm · 27.9 L/min | 8.9 gpm · 33.7 L/min | +21% 60 |
| Pressure declared | 2,567 psi · 177 bar | — | — |
| Three-point lift at ends declared | 2,315 lb · 1,050 kg | — | — |
| Rear PTO speeds declared | 540 rpm | 536 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 3,461 lb · 1,570 kg | 5,908 lb · 2,680 kg | +71% 60 |
| Wheelbase declared | 76.9 in · 1,953 mm | 90.0 in · 2,286 mm | +17% 60 |
| Length declared | 116.1 in · 2,950 mm | 139.0 in · 3,531 mm | +20% 60 |
| Width declared | 67.7 in · 1,720 mm | 86.6 in · 2,200 mm | +28% 60 |
| Height declared | 83.5 in · 2,120 mm | 65.6 in · 1,665 mm | +27% 320 Buster |
| Ground clearance declared | 16.5 in · 420 mm | — | — |
| Turning radius, braked declared | 10.2 ft · 3.10 m | — | — |
| Fuel tank declared | 37.0 qt · 35.0 L | — | — |
BOLINDER-MUNKTELL 320 Buster sources
Source
- Source: Traktorenlexikon, “Bolinder-Munktell BM 320 Buster”
John Deere 60 sources
Source
- Source: Traktorenlexikon, “John Deere Modell 60”