ALLIS-CHALMERS One-Sixty / 160 vs SOMECA SOM-35

13 material differences

Tractor one

1970–1975

No measured PTO figure

Tractor two

1960–1963

No measured PTO figure

Which should you choose?

Read our verdict on the One-Sixty / 160 and the SOM-35 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 3 fields identical or within 5%, which is not counted as material

ALLIS-CHALMERS One-Sixty / 160 and SOMECA SOM-35, field by field
Field	One-Sixty / 160	SOM-35	Gap
Engine
Engine power, claimed claimed	40.5 hp	40.5 hp	—
Engine declared	Perkins AD 3.152	O.M.-FIAT 615.000	differs
Displacement declared	2.50 L	2.27 L	+10% One-Sixty / 160
Maximum torque declared	114 lb·ft · 155 N·m	103 lb·ft · 140 N·m	+11% One-Sixty / 160
Transmission
Top speed declared	15.5 mph · 25 km/h	14.3 mph · 23 km/h	+9% One-Sixty / 160
Clutch declared	—	Pedal-operated two-stage dry double clutch	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	6.7 gpm · 25.4 L/min	4.4 gpm · 16.5 L/min	+54% One-Sixty / 160
Pressure declared	—	2,843 psi · 196 bar	—
Three-point lift at ends declared	4,409 lb · 2,000 kg	2,646 lb · 1,200 kg	+67% One-Sixty / 160
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	5,721 lb · 2,595 kg	3,329 lb · 1,510 kg	+72% One-Sixty / 160
Wheelbase declared	76.0 in · 1,930 mm	71.7 in · 1,820 mm	+6% One-Sixty / 160
Length declared	138.0 in · 3,505 mm	113.4 in · 2,880 mm	+22% One-Sixty / 160
Width declared	64.2 in · 1,630 mm	59.1 in · 1,500 mm	+9% One-Sixty / 160
Height declared	63.0 in · 1,600 mm	55.5 in · 1,410 mm	+13% One-Sixty / 160
Ground clearance declared	19.0 in · 483 mm	18.9 in · 480 mm	—
Turning radius, braked declared	8.3 ft · 2.52 m	9.8 ft · 3.00 m	+19% SOM-35
Fuel tank declared	53.9 qt · 51.0 L	41.2 qt · 39.0 L	+31% One-Sixty / 160

Source

Source