7 material differences · fewer than 12

Tractor oneALLIS-CHALMERS Modell-WF1937–1951No measured PTO figureTractor twoLanz D 7521/31935–1936No measured PTO figure

Which should you choose?

Read our verdict on the Modell-WF and the D 7521/3 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

7 material differences · 2 fields identical or within 5%, which is not counted as material

ALLIS-CHALMERS Modell-WF and Lanz D 7521/3, field by field
FieldModell-WFD 7521/3Gap
Engine
Engine power, claimed claimed24 hp24.5 hp—
Engine declaredALLIS-CHALMERS W-110——
Displacement declared3.30 L——
Transmission
Top speed declared9.9 mph · 16 km/h9.9 mph · 15.9 km/h—
Clutch declaredFoot-operated spring-loaded dry Rockford single-plate clutchPedal operated three-shoe clutch with clutch brakediffers
Hydraulics & hitch
Rear PTO speeds declared535 rpm760differs
Weight & dimensions
Unladen weight declared3,490 lb · 1,583 kg6,724 lb · 3,050 kg+93% D 7521/3
Wheelbase declared70.0 in · 1,778 mm64.8 in · 1,645 mm+8% Modell-WF
Length declared122.0 in · 3,099 mm115.6 in · 2,935 mm+6% Modell-WF
Width declared57.5 in · 1,461 mm66.9 in · 1,700 mm+16% D 7521/3
Ground clearance declared—9.6 in · 245 mm—
Fuel tank declared59.9 qt · 56.7 L52.8 qt · 50 L+13% Modell-WF

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

ALLIS-CHALMERS Modell-WF sources

Source
  • Source: Traktorenlexikon, “Allis-Chalmers WF”
  • Source: Traktorenlexikon, “Allis-Chalmers WC”

Lanz D 7521/3 sources

Source
  • Source: Traktorenlexikon, “Lanz D 7521/3”