6 material differences · fewer than 12
Tractor oneALLIS-CHALMERS Modell-RC1939–1941No measured PTO figureTractor twoLanz D 65001929–1935No measured PTO figure
Which should you choose?
Read our verdict on the Modell-RC and the D 6500 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | Modell-RC | D 6500 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 15.3 hp | 15 hp | — |
| Transmission | |||
| Top speed declared | 7.5 mph · 12 km/h | 3.5–4.7 mph · 5.6–7.5 km/h | differs |
| Hydraulics & hitch | |||
| Rear PTO speeds declared | 532 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,006 lb · 1,817 kg | 5,842 lb · 2,650 kg | +46% D 6500 |
| Wheelbase declared | — | 73.4 in · 1,865 mm | — |
| Length declared | 139.9 in · 3,554 mm | 119.3–126.0 in · 3,030–3,200 mm | differs |
| Width declared | 60.1–80.1 in · 1,527–2,035 mm | 76.6 in · 1,945 mm | differs |
| Ground clearance declared | — | 12.0–12.6 in · 305–320 mm | — |
| Fuel tank declared | 57.7 qt · 54.6 L | 63.4 qt · 60 L | +10% D 6500 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
ALLIS-CHALMERS Modell-RC sources
- Source: Traktorenlexikon, “Allis-Chalmers Modell RC”
Lanz D 6500 sources
- Source: Traktorenlexikon, “Lanz D 6500”