ALLIS-CHALMERS Modell-RC vs Deutz (KHD) F1L 514/51
5 material differences · fewer than 12
Which should you choose?
Read our verdict on the Modell-RC and the F1L 514/51 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
5 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | Modell-RC | F1L 514/51 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 15.3 hp | 15 hp | — |
| Engine declared | — | KHD F1L 514 | — |
| Displacement declared | — | 1.33 L | — |
| Maximum torque declared | — | 51 lb·ft · 69 N·m | — |
| Transmission | |||
| Top speed declared | 7.5 mph · 12 km/h | 12.4 mph · 20 km/h | +67% F1L 514/51 |
| Clutch declared | — | Pedal operated dry single-plate clutch from Fichtel & Sachs | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 5.3 gpm · 20.0 L/min | — |
| Pressure declared | — | 1,991 psi · 137 bar | — |
| Rear PTO speeds declared | 532 rpm | 594 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,006 lb · 1,817 kg | 2,888 lb · 1,310 kg | +39% Modell-RC |
| Maximum permissible mass declared | — | 4,189 lb · 1,900 kg | — |
| Wheelbase declared | — | 62.4–65.7 in · 1,585–1,670 mm | — |
| Length declared | 139.9 in · 3,554 mm | 98.8 in · 2,510 mm | +42% Modell-RC |
| Width declared | 60.1 in · 1,527 mm | 63.0 in · 1,600 mm | — |
| Height declared | 68.0 in · 1,727 mm | 60.6 in · 1,540 mm | +12% Modell-RC |
| Ground clearance declared | — | 15.7 in · 400 mm | — |
| Turning radius, braked declared | — | 9.2 ft · 2.80 m | — |
| Fuel tank declared | 57.7 qt · 54.6 L | — | — |
ALLIS-CHALMERS Modell-RC sources
Source
- Source: Traktorenlexikon, “Allis-Chalmers Modell RC”
Deutz (KHD) F1L 514/51 sources
Source
- Source: Traktorenlexikon, “Deutz F1L 514/51”