7 material differences · fewer than 12

Tractor oneALLIS-CHALMERS FD-51963–1965No measured PTO figureTractor twoPorsche-Diesel Master 4291961–1963No measured PTO figure

Which should you choose?

Read our verdict on the FD-5 and the Master 429 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

7 material differences · 3 fields identical or within 5%, which is not counted as material

ALLIS-CHALMERS FD-5 and Porsche-Diesel Master 429, field by field
FieldFD-5Master 429Gap
Engine
Engine power, claimed claimed49.3 hp49.3 hp—
Engine declaredVENDEUVRE 66Porsche-Diesel F 429differs
Displacement declared—3.50 L—
Maximum torque declared156 lb·ft · 212 N·m——
Transmission
Top speed declared15.5 mph · 25 km/h16.8 mph · 27 km/h+8% Master 429
Clutch declaredPedal-operated dry two-stage double clutch——
Hydraulics & hitch
Pump flow declared—4.2 gpm · 16.0 L/min—
Rear PTO speeds declared540/1000 rpm540 rpmdiffers
Weight & dimensions
Unladen weight declared5,412 lb · 2,455 kg3,942 lb · 1,788 kg+37% FD-5
Wheelbase declared89.8 in · 2,281 mm77.2 in · 1,960 mm+16% FD-5
Length declared129.9 in · 3,300 mm123.6 in · 3,140 mm—
Width declared68.9 in · 1,750 mm69.9 in · 1,775 mm—
Ground clearance declared19.3 in · 490 mm15.7 in · 400 mm+23% FD-5
Fuel tank declared74.0 qt · 70.0 L63.4 qt · 60 L+17% FD-5

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

ALLIS-CHALMERS FD-5 sources

Source
  • Source: Traktorenlexikon, “Allis-Chalmers FD 5”

Porsche-Diesel Master 429 sources

Source
  • Source: Traktorenlexikon, “Porsche-Diesel Master V429”