ALLIS-CHALMERS FD-5 or Porsche-Diesel Master 409?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the FD-5 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Master 409 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The ALLIS-CHALMERS FD-5 suits road haulage better on this data: 28% (5.5 km/h / 3.4 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for ALLIS-CHALMERS FD-5 and Porsche-Diesel Master 409, with the call on each
QuestionFD-5Master 409Call
Which puts more power through the PTO shaft?36.8 kW (49.3 hp)Traktorenlexikon, “Allis-Chalmers FD 5”36.8 kW (49.3 hp)Traktorenlexikon, “Porsche-Diesel Master 409”Not comparableNot comparable on power at the PTO shaft: the FD-5 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Master 409 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the FD-5 and the Master 409.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the FD-5 and the Master 409.
Which pumps more oil for implements?25 L/min (6.6 gpm)Traktorenlexikon, “Porsche-Diesel Master 409”No figureNo call on hydraulic flow: no figure on record for the FD-5.
Which lifts more on the three-point hitch?1,000 kg (2,205 lb)Traktorenlexikon, “Allis-Chalmers FD 5”1,050 kg (2,315 lb)Traktorenlexikon, “Porsche-Diesel Master 409”Not comparableNot comparable on three-point lift: the FD-5: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Allis-Chalmers FD 5”); the Master 409: lift at an unstated point, as stated by the source (Traktorenlexikon, “Porsche-Diesel Master 409”) — not the same quantity, basis and condition.
Which is heavier, for traction?2,455 kg (5,412 lb)Traktorenlexikon, “Allis-Chalmers FD 5”2,575 kg (5,677 lb)Traktorenlexikon, “Porsche-Diesel Master 409”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?No figureNo call on maximum permissible mass: no figure on record for the FD-5 and the Master 409.
Which has the wider choice of gears?8Traktorenlexikon, “Allis-Chalmers FD 5”7Traktorenlexikon, “Porsche-Diesel Master 409”EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the FD-5 and the Master 409.
Which is faster on the road?25 km/h (15.5 mph)Traktorenlexikon, “Allis-Chalmers FD 5”19.5 km/h (12.1 mph)Traktorenlexikon, “Porsche-Diesel Master 409”AheadThe ALLIS-CHALMERS FD-5 has 28% more top speed (5.5 km/h / 3.4 mph) than the Porsche-Diesel Master 409 (both top speed forward, as stated by the source).
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Allis-Chalmers FD 5”540 rpmTraktorenlexikon, “Porsche-Diesel Master 409”AheadThe ALLIS-CHALMERS FD-5 offers 1000 rpm at the PTO, which the Porsche-Diesel Master 409 does not (as stated by the sources).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Porsche-Diesel Master 409”No figureNo call on PTO independence: not stated for the FD-5.
Which drives on both axles?2WDTraktorenlexikon, “Allis-Chalmers FD 5”2WDTraktorenlexikon, “Porsche-Diesel Master 409”EvenEven on drive: all two-wheel drive.
Which is newer, and what about parts?1963–19651962–1963EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The ALLIS-CHALMERS FD-5 has 28% more top speed (5.5 km/h / 3.4 mph) than the Porsche-Diesel Master 409 (both top speed forward, as stated by the source).
  • The ALLIS-CHALMERS FD-5 offers 1000 rpm at the PTO, which the Porsche-Diesel Master 409 does not (as stated by the sources).
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
  • Even on drive: all two-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the FD-5 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Master 409 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • Not comparable on three-point lift: the FD-5: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Allis-Chalmers FD 5”); the Master 409: lift at an unstated point, as stated by the source (Traktorenlexikon, “Porsche-Diesel Master 409”) — not the same quantity, basis and condition.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources