ALLIS-CHALMERS ED-40 vs Massey Ferguson MF 132 S-A

14 material differences

Tractor one

1960–1968

No measured PTO figure

Tractor two

1974–1979

No measured PTO figure

Which should you choose?

Read our verdict on the ED-40 and the MF 132 S-A → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

14 material differences · 1 fields identical or within 5%, which is not counted as material

ALLIS-CHALMERS ED-40 and Massey Ferguson MF 132 S-A, field by field
Field	ED-40	MF 132 S-A	Gap
Engine
Engine power, claimed claimed	36.5 hp	34 hp	+9% ED-40
Engine declared	STANDARD-TRIUMPH 23 C	Eicher EDK 2-3	differs
Displacement declared	2.26 L	1.96 L	+15% ED-40
Maximum torque declared	94 lb·ft · 127 N·m	85 lb·ft · 115 N·m	+10% ED-40
Transmission
Top speed declared	15.5 mph · 25 km/h	12.4 mph · 20 km/h	+25% ED-40
Clutch declared	—	Pedal operated dry single plate clutch	—
Hydraulics & hitch
Pump flow declared	6.0 gpm · 22.7 L/min	4.0 gpm · 15.3 L/min	+48% ED-40
Three-point lift at ends declared	2,161 lb · 980 kg	3,307 lb · 1,500 kg	+53% MF 132 S-A
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	3,715 lb · 1,685 kg	2,844 lb · 1,290 kg	+31% ED-40
Maximum permissible mass declared	—	5,512 lb · 2,500 kg	—
Wheelbase declared	76.5 in · 1,943 mm	63.0 in · 1,600 mm	+21% ED-40
Length declared	121.3 in · 3,080 mm	95.5 in · 2,425 mm	+27% ED-40
Width declared	71.3 in · 1,810 mm	34.6 in · 879 mm	+106% ED-40
Height declared	61.4 in · 1,560 mm	47.6 in · 1,209 mm	+29% ED-40
Ground clearance declared	17.6 in · 448 mm	10.9 in · 277 mm	+62% ED-40
Turning radius, braked declared	10.8 ft · 3.30 m	12.6 ft · 3.85 m	+17% MF 132 S-A
Fuel tank declared	56.4–80.8 qt · 53.4–76.5 L	37.0 qt · 35.0 L	differs

Source

Source