ALLIS-CHALMERS D-17 vs International Harvester Farmall 504
9 material differences · fewer than 12
Which should you choose?
Read our verdict on the D-17 and the Farmall 504 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | D-17 | Farmall 504 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 46.1 hp | 45.3 hp | — |
| Engine declared | ALLIS-CHALMERS G-226 | INTERNATIONAL HARVESTER C-153 | differs |
| Displacement declared | — | 2.49 L | — |
| Transmission | |||
| Top speed declared | 12.4 mph · 20 km/h | 18.6 mph · 30 km/h | +50% Farmall 504 |
| Clutch declared | Foot-operated spring-loaded dry single-plate Rockford clutch | Pedal operated dry single plate clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 10.5 gpm · 39.7 L/min | 12.0 gpm · 45.5 L/min | +15% Farmall 504 |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 4,868 lb · 2,208 kg | 5,386 lb · 2,443 kg | +11% Farmall 504 |
| Wheelbase declared | 93.0–95.7 in · 2,362–2,432 mm | 89.0 in · 2,261 mm | differs |
| Length declared | 140.0–143.0 in · 3,556–3,632 mm | 132.8 in · 3,372 mm | differs |
| Width declared | 76.7 in · 1,949 mm | 83.0 in · 2,108 mm | +8% Farmall 504 |
| Height declared | 81.0 in · 2,057 mm | 78.0 in · 1,981 mm | — |
| Ground clearance declared | 22.8 in · 580 mm | 23.3 in · 591 mm | — |
| Turning radius, braked declared | — | 8.2 ft · 2.50 m | — |
| Fuel tank declared | 75.9 qt · 71.8 L | 90.0 qt · 85.2 L | +19% Farmall 504 |
ALLIS-CHALMERS D-17 sources
Source
- Source: Traktorenlexikon, “Allis-Chalmers D 17”
International Harvester Farmall 504 sources
Source
- Source: Traktorenlexikon, “Farmall Farmall 504”
- Source: Traktorenlexikon, “McCormick Farmall-H”