ALLIS-CHALMERS 220 Landhandler vs Lamborghini R-1356 DT

9 material differences · fewer than 12

Tractor one

1969–1973

No measured PTO figure

Tractor two

1980–1984

No measured PTO figure

Which should you choose?

Read our verdict on the 220 Landhandler and the R-1356 DT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 4 fields identical or within 5%, which is not counted as material

ALLIS-CHALMERS 220 Landhandler and Lamborghini R-1356 DT, field by field
Field	220 Landhandler	R-1356 DT	Gap
Engine
Engine power, claimed claimed	136.1 hp	133.2 hp	—
Engine declared	ALLIS-CHALMERS D-3500	Hürlimann H-1106/12	differs
Displacement declared	6.97 L	6.84 L	—
Maximum torque declared	—	331 lb·ft · 449 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	—	Pedal-operated dry single-disc clutch	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	16.5 gpm · 62.5 L/min	12.7 gpm · 48.0 L/min	+30% 220 Landhandler
Three-point lift at ends declared	6,001 lb · 2,722 kg	—	—
Rear PTO speeds declared	1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	12,161 lb · 5,516 kg	11,905 lb · 5,400 kg	—
Wheelbase declared	100.0 in · 2,539 mm	113.3 in · 2,877 mm	+13% R-1356 DT
Length declared	164.0 in · 4,166 mm	175.2 in · 4,450 mm	+7% R-1356 DT
Width declared	96.0 in · 2,438 mm	89.6 in · 2,275 mm	+7% 220 Landhandler
Height declared	84.0 in · 2,134 mm	109.1 in · 2,770 mm	+30% R-1356 DT
Ground clearance declared	21.0 in · 533 mm	19.3 in · 490 mm	+9% 220 Landhandler
Turning radius, braked declared	11.3 ft · 3.45 m	—	—
Fuel tank declared	203.9 qt · 193.0 L	126.8 qt · 120.0 L	+61% 220 Landhandler

Source

Source