ALLIS-CHALMERS 210 vs J.I. Case 1270
12 material differences
Which should you choose?
Read our verdict on the 210 and the 1270 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
12 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 210 | 1270 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 123.2 hp | 126.2 hp | — |
| Engine declared | ALLIS-CHALMERS D-3500 | CASE A-451 BDT | differs |
| Displacement declared | 6.97 L | 7.39 L | +6% 1270 |
| Maximum torque declared | — | 460 lb·ft · 623 N·m | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 18.6 mph · 30 km/h | +20% 1270 |
| Clutch declared | Pedal or hand-operated dry single-disc clutch | Pedal operated wet multi disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 16.5 gpm · 62.5 L/min | 20.0 gpm · 75.7 L/min | +21% 1270 |
| Three-point lift at ends declared | 6,001 lb · 2,722 kg | 7,165 lb · 3,250 kg | +19% 1270 |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 12,425 lb · 5,636 kg | 15,470 lb · 7,017 kg | +25% 1270 |
| Wheelbase declared | 100.0 in · 2,539 mm | 104.0 in · 2,642 mm | — |
| Length declared | 164.0 in · 4,166 mm | 182.0 in · 4,623 mm | +11% 1270 |
| Width declared | 96.0 in · 2,438 mm | 96.0 in · 2,438 mm | — |
| Height declared | 84.0 in · 2,134 mm | 116.0 in · 2,946 mm | +38% 1270 |
| Ground clearance declared | 21.6 in · 549 mm | 16.0 in · 406 mm | +35% 210 |
| Turning radius, braked declared | 11.3 ft · 3.45 m | 12.3 ft · 3.76 m | +9% 1270 |
| Fuel tank declared | 203.9 qt · 193.0 L | 320.0 qt · 302.8 L | +57% 1270 |
ALLIS-CHALMERS 210 sources
Source
- Source: Traktorenlexikon, “Allis-Chalmers 210”
J.I. Case 1270 sources
Source
- Source: Traktorenlexikon, “Case 1270”