10 material differences · fewer than 12

Tractor oneALLIS-CHALMERS 1901964–1973No measured PTO figureTractor twoFiat 750 (DT)1968–1971No measured PTO figure

Which should you choose?

Read our verdict on the 190 and the 750 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 4 fields identical or within 5%, which is not counted as material

ALLIS-CHALMERS 190 and Fiat 750 (DT), field by field
Field	190	750 (DT)	Gap
Engine
Engine power, claimed claimed	75.0 hp	74.0 hp	—
Engine declared	ALLIS-CHALMERS D-2800	O.M.-FIAT CO 3/70	differs
Displacement declared	4.93 L	4.56 L	+8% 190
Maximum torque declared	—	206 lb·ft · 279 N·m	—
Transmission
Top speed declared	15.5 mph · 25 km/h	14.9 mph · 24 km/h	—
Clutch declared	—	Pedal-operated two-stage dry FEREDO double clutch	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	12.0 gpm · 45.4 L/min	7.3 gpm · 27.5 L/min	+65% 190
Pressure declared	—	2,843 psi · 196 bar	—
Rear PTO speeds declared	540 rpm / 1000 rpm	540 rpm / 1000 rpm	—
Weight & dimensions
Unladen weight declared	7,665–7,844 lb · 3,477–3,558 kg	6,713 lb · 3,045 kg	differs
Wheelbase declared	105.7 in · 2,686 mm	96.1 in · 2,440 mm	+10% 190
Length declared	157.5 in · 4,000 mm	153.9 in · 3,910 mm	—
Width declared	87.6 in · 2,226 mm	72.0 in · 1,830 mm	+22% 190
Height, over the steering wheel declared	82.2 in · 2,089 mm	69.9 in · 1,775 mm	+18% 190
Ground clearance declared	21.7 in · 552 mm	20.5 in · 520 mm	+6% 190
Turning radius, braked declared	11.1 ft · 3.38 m	12.5 ft · 3.80 m	+12% 750 (DT)
Fuel tank declared	192.0 qt · 181.7 L	85.6 qt · 81.0 L	+124% 190

Source

Source