9 material differences · fewer than 12
Tractor oneALLIS-CHALMERS 1851970–1981No measured PTO figureTractor twoSOMECA 800 (TD)1968–1971No measured PTO figure
Which should you choose?
Read our verdict on the 185 and the 800 (TD) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 185 | 800 (TD) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 74.0 hp | 75.0 hp | — |
| Engine declared | ALLIS-CHALMERS D-2800 | O.M.-FIAT CO 3/80 | differs |
| Displacement declared | 4.93 L | 4.94 L | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5 mph · 25 km/h | — |
| Clutch declared | — | pedal-operated dry FEREDO double clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 20.0 gpm · 75.7 L/min | 9.9 gpm · 37.5 L/min | +102% 185 |
| Pressure declared | — | 2,611 psi · 180 bar | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 8,699 lb · 3,946 kg | 6,614 lb · 3,000 kg | +32% 185 |
| Wheelbase declared | 99.2 in · 2,519 mm | 93.7 in · 2,380 mm | +6% 185 |
| Length declared | 158.0 in · 4,013 mm | 159.4 in · 4,050 mm | — |
| Width declared | 76.5 in · 1,943 mm | 76.2–99.8 in · 1,935–2,535 mm | differs |
| Height, over the exhaust declared | 95.6 in · 2,428 mm | 90.6 in · 2,300 mm | +6% 185 |
| Ground clearance declared | 20.5 in · 521 mm | 13.6 in · 346 mm | +51% 185 |
| Turning radius, braked declared | 10.2 ft · 3.12 m | 12.1 ft · 3.70 m | +19% 800 (TD) |
| Fuel tank declared | 98.3 qt · 93.0 L | 85.6 qt · 81.0 L | +15% 185 |
ALLIS-CHALMERS 185 sources
Source
- Source: Traktorenlexikon, “Allis-Chalmers 185”
- Source: Traktorenlexikon, “Allis-Chalmers 180”
SOMECA 800 (TD) sources
Source
- Source: Traktorenlexikon, “Someca 800”