7 material differences · fewer than 12

Tractor oneAllgaier R181946–1952No measured PTO figureTractor twoSOMECA SOM-20 D1956–1961No measured PTO figure

Which should you choose?

Read our verdict on the R18 and the SOM-20 D → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

7 material differences · 3 fields identical or within 5%, which is not counted as material

Allgaier R18 and SOMECA SOM-20 D, field by field
FieldR18SOM-20 DGap
Engine
Engine power, claimed claimed17.7 hp17.7 hp—
Engine declared—FIAT 614.000—
Displacement declared—1.14 L—
Maximum torque declared—43 lb·ft · 58.8 N·m—
Transmission
Top speed declared11.8 mph · 19 km/h13.0 mph · 21 km/h+11% SOM-20 D
Clutch declaredSingle dry clutchPedal-operated dry FERODO single-plate clutchdiffers
Hydraulics & hitch
Pump flow declared—2.0 gpm · 7.5 L/min—
Rear PTO speeds declared540 rpm540 rpm—
Weight & dimensions
Unladen weight declared3,527 lb · 1,600 kg1,874 lb · 850 kg+88% R18
Wheelbase declared59.1 in · 1,500 mm66.9 in · 1,700 mm+13% SOM-20 D
Length declared102.4 in · 2,600 mm102.2 in · 2,595 mm—
Width declared58.3 in · 1,480 mm47.6–75.2 in · 1,210–1,910 mmdiffers
Ground clearance declared13.8 in · 350 mm19.7 in · 500 mm+43% SOM-20 D
Turning radius, braked declared8.2 ft · 2.50 m——
Fuel tank declared29.6 qt · 28 L25.4 qt · 24.0 L+17% R18

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Allgaier R18 sources

Source
  • Source: Traktorenlexikon, “Allgaier R18”

SOMECA SOM-20 D sources

Source
  • Source: Traktorenlexikon, “Someca SOM 20 D”