AGRIFULL Tornado 80 (DT) or Landini 8800 (DT)?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the Tornado 80 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 8800 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Landini 8800 (DT) suits loader and hydraulic implement work better on this data: 72% (21.5 L/min / 5.7 gpm) more hydraulic flow and 71% (1,392 kg / 3,069 lb) more three-point lift.
- The Landini 8800 (DT) suits road haulage better on this data: 20% (5.0 km/h / 3.1 mph) more top speed.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | Tornado 80 (DT) | 8800 (DT) | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 56.6 kW (75.9 hp)Traktorenlexikon, “Agrifull Tornedo 80” | 56.6 kW (75.9 hp)Traktorenlexikon, “Landini 8800 DT” | Not comparableNot comparable on power at the PTO shaft: the Tornado 80 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 8800 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the Tornado 80 (DT) and the 8800 (DT). |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the Tornado 80 (DT) and the 8800 (DT). |
| Which pumps more oil for implements? | 30.0 L/min (7.9 gpm)Traktorenlexikon, “Agrifull Tornedo 80” | 51.5 L/min (13.6 gpm)Traktorenlexikon, “Landini 8800 DT” | AheadThe Landini 8800 (DT) has 72% more hydraulic flow (21.5 L/min / 5.7 gpm) than the AGRIFULL Tornado 80 (DT) (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 1,963 kg (4,328 lb)Traktorenlexikon, “Agrifull Tornedo 80” | 3,355 kg (7,397 lb)Traktorenlexikon, “Landini 8800 DT” | AheadThe Landini 8800 (DT) has 71% more lift (1,392 kg / 3,069 lb) than the AGRIFULL Tornado 80 (DT) (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 3,196 kg (7,046 lb)Traktorenlexikon, “Agrifull Tornedo 80” | 3,820 kg (8,422 lb)Traktorenlexikon, “Landini 8800 DT” | Ahead (a fact, not an advantage)The Landini 8800 (DT) is 20% heavier (624 kg / 1,376 lb) than the AGRIFULL Tornado 80 (DT) (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the Tornado 80 (DT) and the 8800 (DT). |
| Which has the wider choice of gears? | 12 to 20Traktorenlexikon, “Agrifull Tornedo 80” | 32Traktorenlexikon, “Landini 8800 DT” | AheadThe Landini 8800 (DT) has 60% more forward gears (12 gears) than the AGRIFULL Tornado 80 (DT) (both forward gears, as stated by the source). |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the Tornado 80 (DT) and the 8800 (DT). |
| Which is faster on the road? | 25 km/h (15.5 mph)Traktorenlexikon, “Agrifull Tornedo 80” | 30 km/h (18.6 mph)Traktorenlexikon, “Landini 8800 DT” | AheadThe Landini 8800 (DT) has 20% more top speed (5.0 km/h / 3.1 mph) than the AGRIFULL Tornado 80 (DT) (both top speed forward, as stated by the source). |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “Agrifull Tornedo 80” | 540/1000 rpmTraktorenlexikon, “Landini 8800 DT” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Agrifull Tornedo 80” | independentTraktorenlexikon, “Landini 8800 DT” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “Agrifull Tornedo 80” | Two-wheel or four-wheel driveTraktorenlexikon, “Landini 8800 DT” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1977–1980 | 1987–2000 | Ahead (a fact, not an advantage)The Landini 8800 (DT) is newer: production began 10 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Landini 8800 (DT) has 72% more hydraulic flow (21.5 L/min / 5.7 gpm) than the AGRIFULL Tornado 80 (DT) (both pump flow, as stated by the source).
- The Landini 8800 (DT) has 71% more lift (1,392 kg / 3,069 lb) than the AGRIFULL Tornado 80 (DT) (both lift at the hitch ends, as stated by the source).
- The Landini 8800 (DT) is 20% heavier (624 kg / 1,376 lb) than the AGRIFULL Tornado 80 (DT) (both unladen weight, as stated by the source).
- The Landini 8800 (DT) has 60% more forward gears (12 gears) than the AGRIFULL Tornado 80 (DT) (both forward gears, as stated by the source).
- The Landini 8800 (DT) has 20% more top speed (5.0 km/h / 3.1 mph) than the AGRIFULL Tornado 80 (DT) (both top speed forward, as stated by the source).
- The Landini 8800 (DT) is newer: production began 10 years later. We hold no parts-availability data, so there is no call on parts.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on PTO independence: every PTO is independent.
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on power at the PTO shaft: the Tornado 80 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 8800 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass and a creeper range.
← Every figure for both machines, side by side, with sources