AGRIFULL Rodeo 95 (DT) or VALMET 805/805-4?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the Rodeo 95 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 805/805-4 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The VALMET 805/805-4 suits loader and hydraulic implement work better on this data: 71% (21.2 L/min / 5.6 gpm) more hydraulic flow and 81% (1,860 kg / 4,101 lb) more three-point lift.
  • The VALMET 805/805-4 suits road haulage better on this data: 20% (5.0 km/h / 3.1 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for AGRIFULL Rodeo 95 (DT) and VALMET 805/805-4, with the call on each
QuestionRodeo 95 (DT)805/805-4Call
Which puts more power through the PTO shaft?69.9 kW (93.7 hp)Traktorenlexikon, “Agrifull Rodeo 95”69.9 kW (93.7 hp)Traktorenlexikon, “Valmet 805”Not comparableNot comparable on power at the PTO shaft: the Rodeo 95 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 805/805-4 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the Rodeo 95 (DT) and the 805/805-4.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the Rodeo 95 (DT) and the 805/805-4.
Which pumps more oil for implements?30.0 L/min (7.9 gpm)Traktorenlexikon, “Agrifull Rodeo 95”51.2 L/min (13.5 gpm)Traktorenlexikon, “Valmet 805”AheadThe VALMET 805/805-4 has 71% more hydraulic flow (21.2 L/min / 5.6 gpm) than the AGRIFULL Rodeo 95 (DT) (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?2,290 kg (5,049 lb)Traktorenlexikon, “Agrifull Rodeo 95”4,150 kg (9,149 lb)Traktorenlexikon, “Valmet 805”AheadThe VALMET 805/805-4 has 81% more lift (1,860 kg / 4,101 lb) than the AGRIFULL Rodeo 95 (DT) (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?3,370 kg (7,430 lb)Traktorenlexikon, “Agrifull Rodeo 95”3,540 kg (7,804 lb)Traktorenlexikon, “Valmet 805”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?No figureNo call on maximum permissible mass: no figure on record for the Rodeo 95 (DT) and the 805/805-4.
Which has the wider choice of gears?12 to 20Traktorenlexikon, “Agrifull Rodeo 95”8 to 16Traktorenlexikon, “Valmet 805”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the Rodeo 95 (DT) and the 805/805-4.
Which is faster on the road?25 km/h (15.5 mph)Traktorenlexikon, “Agrifull Rodeo 95”30 km/h (18.6 mph)Traktorenlexikon, “Valmet 805”AheadThe VALMET 805/805-4 has 20% more top speed (5.0 km/h / 3.1 mph) than the AGRIFULL Rodeo 95 (DT) (both top speed forward, as stated by the source).
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Agrifull Rodeo 95”540 rpmTraktorenlexikon, “Valmet 805”AheadThe AGRIFULL Rodeo 95 (DT) offers 1000 rpm at the PTO, which the VALMET 805/805-4 does not (as stated by the sources).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Agrifull Rodeo 95”independentTraktorenlexikon, “Valmet 805”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Agrifull Rodeo 95”2WD / 4WDTraktorenlexikon, “Valmet 805”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1979–19801983–1989EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The VALMET 805/805-4 has 71% more hydraulic flow (21.2 L/min / 5.6 gpm) than the AGRIFULL Rodeo 95 (DT) (both pump flow, as stated by the source).
  • The VALMET 805/805-4 has 81% more lift (1,860 kg / 4,101 lb) than the AGRIFULL Rodeo 95 (DT) (both lift at the hitch ends, as stated by the source).
  • The VALMET 805/805-4 has 20% more top speed (5.0 km/h / 3.1 mph) than the AGRIFULL Rodeo 95 (DT) (both top speed forward, as stated by the source).
  • The AGRIFULL Rodeo 95 (DT) offers 1000 rpm at the PTO, which the VALMET 805/805-4 does not (as stated by the sources).
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the Rodeo 95 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 805/805-4 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources