AGRIFULL A-50 (DT) or Fendt Farmer 303 LSA?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the A-50 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Farmer 303 LSA has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Fendt Farmer 303 LSA suits loader and hydraulic implement work better on this data: 18% (6.2 L/min / 1.6 gpm) more hydraulic flow.
  • The Fendt Farmer 303 LSA suits road haulage better on this data: 33% (10.0 km/h / 6.2 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for AGRIFULL A-50 (DT) and Fendt Farmer 303 LSA, with the call on each
QuestionA-50 (DT)Farmer 303 LSACall
Which puts more power through the PTO shaft?36.8 kW (49.3 hp)Traktorenlexikon, “Agrifull A-50”38.1 kW (51.1 hp)Traktorenlexikon, “Fendt Farmer 303 LSA”Not comparableNot comparable on power at the PTO shaft: the A-50 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Farmer 303 LSA has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the A-50 (DT) and the Farmer 303 LSA.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the A-50 (DT) and the Farmer 303 LSA.
Which pumps more oil for implements?34.5 L/min (9.1 gpm)Traktorenlexikon, “Agrifull A-50”40.7 L/min (10.8 gpm)Traktorenlexikon, “Fendt Farmer 303 LSA”AheadThe Fendt Farmer 303 LSA has 18% more hydraulic flow (6.2 L/min / 1.6 gpm) than the AGRIFULL A-50 (DT) (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?2,125 kg (4,685 lb)Traktorenlexikon, “Agrifull A-50”No figureNo call on three-point lift: no figure on record for the Farmer 303 LSA.
Which is heavier, for traction?2,125 kg (4,685 lb)Traktorenlexikon, “Agrifull A-50”3,215 kg (7,088 lb)Traktorenlexikon, “Fendt Farmer 303 LSA”Ahead (a fact, not an advantage)The Fendt Farmer 303 LSA is 51% heavier (1,090 kg / 2,403 lb) than the AGRIFULL A-50 (DT) (both unladen weight, as stated by the source).
Which may carry more ballast and load?5,000 kg (11,023 lb)Traktorenlexikon, “Fendt Farmer 303 LSA”No figureNo call on maximum permissible mass: no figure on record for the A-50 (DT).
Which has the wider choice of gears?12 to 20Traktorenlexikon, “Agrifull A-50”15Traktorenlexikon, “Fendt Farmer 303 LSA”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the A-50 (DT) and the Farmer 303 LSA.
Which is faster on the road?30 km/h (18.6 mph)Traktorenlexikon, “Agrifull A-50”40 km/h (24.9 mph)Traktorenlexikon, “Fendt Farmer 303 LSA”AheadThe Fendt Farmer 303 LSA has 33% more top speed (10.0 km/h / 6.2 mph) than the AGRIFULL A-50 (DT) (both top speed forward, as stated by the source).
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Agrifull A-50”540/650/750/1000 rpmTraktorenlexikon, “Fendt Farmer 303 LSA”AheadThe Fendt Farmer 303 LSA offers 750 rpm at the PTO, which the AGRIFULL A-50 (DT) does not (as stated by the sources).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Agrifull A-50”independentTraktorenlexikon, “Fendt Farmer 303 LSA”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Agrifull A-50”4WDTraktorenlexikon, “Fendt Farmer 303 LSA”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1991–19931982–1985Ahead (a fact, not an advantage)The AGRIFULL A-50 (DT) is newer: production began 9 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Fendt Farmer 303 LSA has 18% more hydraulic flow (6.2 L/min / 1.6 gpm) than the AGRIFULL A-50 (DT) (both pump flow, as stated by the source).
  • The Fendt Farmer 303 LSA is 51% heavier (1,090 kg / 2,403 lb) than the AGRIFULL A-50 (DT) (both unladen weight, as stated by the source).
  • The Fendt Farmer 303 LSA has 33% more top speed (10.0 km/h / 6.2 mph) than the AGRIFULL A-50 (DT) (both top speed forward, as stated by the source).
  • The Fendt Farmer 303 LSA offers 750 rpm at the PTO, which the AGRIFULL A-50 (DT) does not (as stated by the sources).
  • The AGRIFULL A-50 (DT) is newer: production began 9 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the A-50 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Farmer 303 LSA has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources