AGRIFULL A-50 (DT) or DEUTZ-ALLIS 6250?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the A-50 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 6250 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The DEUTZ-ALLIS 6250 suits loader and hydraulic implement work better on this data: 27% (9.4 L/min / 2.5 gpm) more hydraulic flow and 13% (275 kg / 606 lb) more three-point lift.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | A-50 (DT) | 6250 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 36.8 kW (49.3 hp)Traktorenlexikon, “Agrifull A-50” | 37.5 kW (50.3 hp)Traktorenlexikon, “Deutz-Allis 6250” | Not comparableNot comparable on power at the PTO shaft: the A-50 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 6250 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the A-50 (DT) and the 6250. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the A-50 (DT) and the 6250. |
| Which pumps more oil for implements? | 34.5 L/min (9.1 gpm)Traktorenlexikon, “Agrifull A-50” | 43.9 L/min (11.6 gpm)Traktorenlexikon, “Deutz-Allis 6250” | AheadThe DEUTZ-ALLIS 6250 has 27% more hydraulic flow (9.4 L/min / 2.5 gpm) than the AGRIFULL A-50 (DT) (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 2,125 kg (4,685 lb)Traktorenlexikon, “Agrifull A-50” | 2,400 kg (5,291 lb)Traktorenlexikon, “Deutz-Allis 6250” | AheadThe DEUTZ-ALLIS 6250 has 13% more lift (275 kg / 606 lb) than the AGRIFULL A-50 (DT) (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 2,125 kg (4,685 lb)Traktorenlexikon, “Agrifull A-50” | 2,730 kg (6,019 lb)Traktorenlexikon, “Deutz-Allis 6250” | Ahead (a fact, not an advantage)The DEUTZ-ALLIS 6250 is 28% heavier (605 kg / 1,334 lb) than the AGRIFULL A-50 (DT) (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | 5,000 kg (11,023 lb)Traktorenlexikon, “Deutz-Allis 6250” | No figureNo call on maximum permissible mass: no figure on record for the A-50 (DT). |
| Which has the wider choice of gears? | 12 to 20Traktorenlexikon, “Agrifull A-50” | 8 to 16Traktorenlexikon, “Deutz-Allis 6250” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the A-50 (DT) and the 6250. |
| Which is faster on the road? | 30 km/h (18.6 mph)Traktorenlexikon, “Agrifull A-50” | 30 km/h (18.6 mph)Traktorenlexikon, “Deutz-Allis 6250” | EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “Agrifull A-50” | 540/1000 rpmTraktorenlexikon, “Deutz-Allis 6250” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Agrifull A-50” | independentTraktorenlexikon, “Deutz-Allis 6250” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “Agrifull A-50” | Two-wheel or four-wheel driveTraktorenlexikon, “Deutz-Allis 6250” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1991–1993 | 1986–1990 | Ahead (a fact, not an advantage)The AGRIFULL A-50 (DT) is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The DEUTZ-ALLIS 6250 has 27% more hydraulic flow (9.4 L/min / 2.5 gpm) than the AGRIFULL A-50 (DT) (both pump flow, as stated by the source).
- The DEUTZ-ALLIS 6250 has 13% more lift (275 kg / 606 lb) than the AGRIFULL A-50 (DT) (both lift at the hitch ends, as stated by the source).
- The DEUTZ-ALLIS 6250 is 28% heavier (605 kg / 1,334 lb) than the AGRIFULL A-50 (DT) (both unladen weight, as stated by the source).
- The AGRIFULL A-50 (DT) is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on PTO independence: every PTO is independent.
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on power at the PTO shaft: the A-50 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 6250 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass and a creeper range.
← Every figure for both machines, side by side, with sources