AGRIFULL A-140 DT Turbo vs Deutz-Fahr DX 160

11 material differences · fewer than 12

Tractor one

1987–1991

No measured PTO figure

Tractor two

1978–1984

No measured PTO figure

Which should you choose?

Read our verdict on the A-140 DT Turbo and the DX 160 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 4 fields identical or within 5%, which is not counted as material

AGRIFULL A-140 DT Turbo and Deutz-Fahr DX 160, field by field
Field	A-140 DT Turbo	DX 160	Gap
Engine
Engine power, claimed claimed	138 hp	148.0 hp	+7% DX 160
Engine declared	FIAT-IVECO 8065.25.000	KHD BF6L 913	differs
Displacement declared	5.86 L	6.13 L	—
Maximum torque declared	343 lb·ft · 465 N·m	393 lb·ft · 533 N·m	+15% DX 160
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	15.5–18.6 mph · 25–30 km/h	differs
Clutch declared	—	Pedal operated, dry single-disc clutch	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	13.4 gpm · 50.8 L/min	15.4 gpm · 58.4 L/min	+15% DX 160
Pressure declared	3,046–3,118 psi · 210–215 bar	3,771 psi · 260 bar	differs
Three-point lift at ends declared	—	14,330 lb · 6,500 kg	—
Rear PTO speeds declared	540/1000 rpm	1000 rpm	differs
Weight & dimensions
Unladen weight declared	14,991 lb · 6,800 kg	11,905 lb · 5,400 kg	+26% A-140 DT Turbo
Maximum permissible mass declared	—	18,739 lb · 8,500 kg	—
Wheelbase declared	104.3 in · 2,650 mm	103.6 in · 2,631 mm	—
Length declared	164.6 in · 4,180 mm	185.4 in · 4,710 mm	+13% DX 160
Width declared	94.5 in · 2,400 mm	93.3 in · 2,370 mm	—
Height declared	111.4 in · 2,830 mm	107.5 in · 2,730 mm	—
Ground clearance declared	17.8 in · 452 mm	23.8 in · 605 mm	+34% DX 160
Turning radius, braked declared	16.8 ft · 5.12 m	14.7 ft · 4.47 m	+15% A-140 DT Turbo
Fuel tank declared	190.2 qt · 180.0 L	158.5 qt · 150 L	+20% A-140 DT Turbo

Source

Source