AGRIFULL 80-66 (DT) vs Massey Ferguson MF 375 (A)

12 material differences

Tractor one

1980–1986

No measured PTO figure

Tractor two

1987–1997

No measured PTO figure

Which should you choose?

Read our verdict on the 80-66 (DT) and the MF 375 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 3 fields identical or within 5%, which is not counted as material

AGRIFULL 80-66 (DT) and Massey Ferguson MF 375 (A), field by field
Field	80-66 (DT)	MF 375 (A)	Gap
Engine
Engine power, claimed claimed	67 hp	67.1 hp	—
Engine declared	MWM D-325-4	Perkins A 4.236	differs
Displacement declared	3.40 L	3.87 L	+14% MF 375 (A)
Maximum torque declared	153 lb·ft · 208 N·m	173 lb·ft · 234 N·m	+13% MF 375 (A)
Transmission
Top speed declared	15.5 mph · 25 km/h	18.6 mph · 30 km/h	+20% MF 375 (A)
Clutch declared	Dry VALEO or LuK double clutch	—	—
Hydraulics & hitch
Pump flow declared	8.5 gpm · 32.1 L/min	16.7 gpm · 63.3 L/min	+97% MF 375 (A)
Pressure declared	3,118 psi · 215 bar	2,466 psi · 170 bar	+26% 80-66 (DT)
Three-point lift at ends declared	—	6,746 lb · 3,060 kg	—
Rear PTO speeds declared	540 rpm	540 rpm / 1000 rpm	differs
Weight & dimensions
Unladen weight declared	5,556 lb · 2,520 kg	6,945 lb · 3,150 kg	+25% MF 375 (A)
Maximum permissible mass declared	—	13,669 lb · 6,200 kg	—
Wheelbase declared	90.7 in · 2,305 mm	89.8 in · 2,280 mm	—
Length declared	134.3 in · 3,412 mm	153.1 in · 3,888 mm	+14% MF 375 (A)
Width declared	76.0 in · 1,930 mm	78.0 in · 1,980 mm	—
Height declared	92.7 in · 2,355 mm	104.1 in · 2,645 mm	+12% MF 375 (A)
Ground clearance declared	20.7 in · 525 mm	12.2 in · 311 mm	+69% 80-66 (DT)
Turning radius, braked declared	12.6 ft · 3.84 m	—	—
Fuel tank declared	84.5 qt · 80.0 L	114.1 qt · 108 L	+35% MF 375 (A)

Source

Source