AGRIFULL 80-66 (DT) vs Case-IH CS-68 (A)
8 material differences · fewer than 12
Which should you choose?
Read our verdict on the 80-66 (DT) and the CS-68 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 80-66 (DT) | CS-68 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 67 hp | 67 hp | — |
| Engine declared | MWM D-325-4 | MWM 301.89 T | differs |
| Displacement declared | 3.40 L | — | — |
| Maximum torque declared | 153 lb·ft · 208 N·m | — | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | Dry VALEO or LuK double clutch | Dry double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 8.5 gpm · 32.1 L/min | 10.9 gpm · 41.4 L/min | +29% CS-68 (A) |
| Pressure declared | 3,118 psi · 215 bar | — | — |
| Three-point lift at ends declared | — | 3,968 lb · 1,800 kg | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,556 lb · 2,520 kg | 6,217 lb · 2,820 kg | +12% CS-68 (A) |
| Wheelbase declared | 90.7 in · 2,305 mm | 87.0 in · 2,209 mm | — |
| Length declared | 134.3 in · 3,412 mm | 145.7 in · 3,700 mm | +8% CS-68 (A) |
| Width declared | 76.0 in · 1,930 mm | 74.8 in · 1,900 mm | — |
| Height declared | 92.7 in · 2,355 mm | 92.3 in · 2,345 mm | — |
| Ground clearance declared | 20.7 in · 525 mm | 15.7 in · 400 mm | +31% 80-66 (DT) |
| Turning radius, braked declared | 12.6 ft · 3.84 m | — | — |
| Fuel tank declared | 84.5 qt · 80.0 L | 87.7 qt · 83.0 L | — |
AGRIFULL 80-66 (DT) sources
Source
- Source: Traktorenlexikon, “Agrifull 80-66”
Case-IH CS-68 (A) sources
Source
- Source: Traktorenlexikon, “Case-IH CS68/a”
- Source: Traktorenlexikon, “Steyr M 968”