9 material differences · fewer than 12
Tractor oneAGRIFULL 80-60 (DT)1980–1986No measured PTO figureTractor twoRenault 80 S/F1976–1984No measured PTO figure
Which should you choose?
Read our verdict on the 80-60 (DT) and the 80 S/F → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | 80-60 (DT) | 80 S/F | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 55.3 hp | 55.3 hp | — |
| Engine declared | V.M.-MOTTORI 1053 SU | MWM D 327-3 | differs |
| Displacement declared | 2.86 L | 2.83 L | — |
| Maximum torque declared | 127 lb·ft · 172 N·m | 126 lb·ft · 171 N·m | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5 mph · 25 km/h | — |
| Clutch declared | Dry Valeo or LuK dual clutch | Dry LuK double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 5.8 gpm · 22.0 L/min | 7.1 gpm · 26.8 L/min | +22% 80 S/F |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 5,710 lb · 2,590 kg | 3,516 lb · 1,595 kg | +62% 80-60 (DT) |
| Wheelbase declared | 85.8 in · 2,180 mm | 73.5 in · 1,868 mm | +17% 80-60 (DT) |
| Length declared | 137.8 in · 3,500 mm | 133.8 in · 3,398 mm | — |
| Width declared | 76.0 in · 1,930 mm | 48.0–66.0 in · 1,220–1,677 mm | differs |
| Ground clearance declared | 16.5 in · 420 mm | 15.4 in · 390 mm | +8% 80-60 (DT) |
| Turning radius, braked declared | 12.5 ft · 3.80 m | 8.7 ft · 2.66 m | +43% 80-60 (DT) |
| Fuel tank declared | 84.5 qt · 80.0 L | 54.9 qt · 52.0 L | +54% 80-60 (DT) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
AGRIFULL 80-60 (DT) sources
- Source: Traktorenlexikon, “Agrifull 80-60”
Renault 80 S/F sources
- Source: Traktorenlexikon, “Renault 80S R7386”
- Source: Traktorenlexikon, “Renault 461 R7441”