AGRIFULL 80-56 (DT) or ZETOR 5911/5945?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the 80-56 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 5911/5945 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The ZETOR 5911/5945 suits loader and hydraulic implement work better on this data: 18% (4.0 L/min / 1.1 gpm) more hydraulic flow.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “similar machines”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 80-56 (DT) | 5911/5945 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 42.7 kW (57.3 hp)Traktorenlexikon, “Agrifull 80-56” | 42.7 kW (57.3 hp)Traktorenlexikon, “Zetor 5911” | Not comparableNot comparable on power at the PTO shaft: the 80-56 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 5911/5945 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 80-56 (DT) and the 5911/5945. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 80-56 (DT) and the 5911/5945. |
| Which pumps more oil for implements? | 22.0 L/min (5.8 gpm)Traktorenlexikon, “Agrifull 80-56” | 26.0 L/min (6.9 gpm)Traktorenlexikon, “Zetor 5911” | AheadThe ZETOR 5911/5945 has 18% more hydraulic flow (4.0 L/min / 1.1 gpm) than the AGRIFULL 80-56 (DT) (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | — | 3,577 kg (7,886 lb)Traktorenlexikon, “Zetor 5911” | No figureNo call on three-point lift: no figure on record for the 80-56 (DT). |
| Which is heavier, for traction? | 2,300 kg (5,071 lb)Traktorenlexikon, “Agrifull 80-56” | 2,810 kg (6,195 lb)Traktorenlexikon, “Zetor 5911” | Ahead (a fact, not an advantage)The ZETOR 5911/5945 is 22% heavier (510 kg / 1,124 lb) than the AGRIFULL 80-56 (DT) (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the 80-56 (DT) and the 5911/5945. |
| Which has the wider choice of gears? | 12Traktorenlexikon, “Agrifull 80-56” | 10 to 20Traktorenlexikon, “Zetor 5911” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 80-56 (DT) and the 5911/5945. |
| Which is faster on the road? | 25 km/h (15.5 mph)Traktorenlexikon, “Agrifull 80-56” | 25 km/h (15.5 mph)Traktorenlexikon, “Zetor 5911” | EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which offers more PTO speeds? | 540 rpmTraktorenlexikon, “Agrifull 80-56” | 540/1000 rpmTraktorenlexikon, “Zetor 5911” | AheadThe ZETOR 5911/5945 offers 1000 rpm at the PTO, which the AGRIFULL 80-56 (DT) does not (as stated by the sources). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Agrifull 80-56” | independentTraktorenlexikon, “Zetor 5911” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “Agrifull 80-56” | Two-wheel or four-wheel driveTraktorenlexikon, “Zetor 5911” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1980–1986 | 1977–1980 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The ZETOR 5911/5945 has 18% more hydraulic flow (4.0 L/min / 1.1 gpm) than the AGRIFULL 80-56 (DT) (both pump flow, as stated by the source).
- The ZETOR 5911/5945 is 22% heavier (510 kg / 1,124 lb) than the AGRIFULL 80-56 (DT) (both unladen weight, as stated by the source).
- The ZETOR 5911/5945 offers 1000 rpm at the PTO, which the AGRIFULL 80-56 (DT) does not (as stated by the sources).
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on PTO independence: every PTO is independent.
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on power at the PTO shaft: the 80-56 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 5911/5945 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass and a creeper range.
← Every figure for both machines, side by side, with sources