7 material differences · fewer than 12
Tractor oneAGRIFULL 80-56 (DT)1980–1986No measured PTO figureTractor twoSOMECA 570 V/E1978–1982No measured PTO figure
Which should you choose?
Read our verdict on the 80-56 (DT) and the 570 V/E → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 80-56 (DT) | 570 V/E | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 57.3 hp | 57.3 hp | — |
| Engine declared | MWM D-227-3 | FIAT-IVECO 8035.04.377 | differs |
| Displacement declared | 2.83 L | 2.75 L | — |
| Maximum torque declared | 127 lb·ft · 172 N·m | 132 lb·ft · 179 N·m | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5 mph · 25 km/h | — |
| Clutch declared | — | Dry FERODO double clutch, pedal-operated driving clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 5.8 gpm · 22.0 L/min | 6.5 gpm · 24.6 L/min | +12% 570 V/E |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 5,071 lb · 2,300 kg | 4,321 lb · 1,960 kg | +17% 80-56 (DT) |
| Wheelbase declared | 85.6 in · 2,175 mm | 74.8 in · 1,900 mm | +14% 80-56 (DT) |
| Length declared | 129.8 in · 3,298 mm | — | — |
| Width declared | 76.0 in · 1,930 mm | 42.5 in · 1,080 mm | +79% 80-56 (DT) |
| Ground clearance declared | 19.5 in · 495 mm | 12.6 in · 320 mm | +55% 80-56 (DT) |
| Turning radius, braked declared | 12.5 ft · 3.80 m | — | — |
| Fuel tank declared | 84.5 qt · 80.0 L | 71.9 qt · 68.0 L | +18% 80-56 (DT) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
AGRIFULL 80-56 (DT) sources
- Source: Traktorenlexikon, “Agrifull 80-56”
SOMECA 570 V/E sources
- Source: Traktorenlexikon, “Someca 570 V/E”
- Source: Traktorenlexikon, “Someca 570”