8 material differences · fewer than 12
Tractor oneAGRIFULL 80-56 (DT)1980–1986No measured PTO figureTractor twoMassey Ferguson MF 363 (A)1987–1994No measured PTO figure
Which should you choose?
Read our verdict on the 80-56 (DT) and the MF 363 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 80-56 (DT) | MF 363 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 57.3 hp | 58 hp | — |
| Engine declared | MWM D-227-3 | Perkins T 3.152-4 Turbo | differs |
| Displacement declared | 2.83 L | 2.50 L | +13% 80-56 (DT) |
| Maximum torque declared | 127 lb·ft · 172 N·m | 156 lb·ft · 212 N·m | +23% MF 363 (A) |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 18.6 mph · 30 km/h | +20% MF 363 (A) |
| Clutch declared | — | Dry and air-cooled double clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Open centre | — |
| Pump flow declared | 5.8 gpm · 22.0 L/min | — | — |
| Pressure declared | — | 2,756 psi · 190 bar | — |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,071 lb · 2,300 kg | 5,291 lb · 2,400 kg | — |
| Wheelbase declared | 85.6 in · 2,175 mm | 83.7 in · 2,126 mm | — |
| Length declared | 129.8 in · 3,298 mm | 139.4 in · 3,540 mm | +7% MF 363 (A) |
| Width declared | 76.0 in · 1,930 mm | 75.8 in · 1,925 mm | — |
| Ground clearance declared | 19.5 in · 495 mm | 19.3 in · 490 mm | — |
| Turning radius, braked declared | 12.5 ft · 3.80 m | 11.7 ft · 3.57 m | +6% 80-56 (DT) |
| Fuel tank declared | 84.5 qt · 80.0 L | 90.9 qt · 86.0 L | +8% MF 363 (A) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
AGRIFULL 80-56 (DT) sources
- Source: Traktorenlexikon, “Agrifull 80-56”
Massey Ferguson MF 363 (A) sources
- Source: Traktorenlexikon, “Massey Ferguson MF 363”