6 material differences · fewer than 12
Tractor oneAGRIFULL 80-56 (DT)1980–1986No measured PTO figureTractor twoFiat 566 (DT)1982–1986No measured PTO figure
Which should you choose?
Read our verdict on the 80-56 (DT) and the 566 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 7 fields identical or within 5%, which is not counted as material
| Field | 80-56 (DT) | 566 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 57.3 hp | 57.3 hp | — |
| Engine declared | MWM D-227-3 | FIAT-IVECO 8035.04.376 | differs |
| Displacement declared | 2.83 L | 2.75 L | — |
| Maximum torque declared | 127 lb·ft · 172 N·m | 148 lb·ft · 200 N·m | +16% 566 (DT) |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5–18.6 mph · 25–30 km/h | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 5.8 gpm · 22.0 L/min | — | — |
| Pressure declared | — | 3,336–3,481 psi · 230–240 bar | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 5,071 lb · 2,300 kg | 5,247 lb · 2,380 kg | — |
| Wheelbase declared | 85.6 in · 2,175 mm | 85.6 in · 2,175 mm | — |
| Length declared | 129.8 in · 3,298 mm | 127.9 in · 3,249 mm | — |
| Width declared | 76.0 in · 1,930 mm | 75.6 in · 1,920 mm | — |
| Ground clearance declared | 19.5 in · 495 mm | 20.7 in · 525 mm | +6% 566 (DT) |
| Turning radius, braked declared | 12.5 ft · 3.80 m | 11.8 ft · 3.60 m | +6% 80-56 (DT) |
| Fuel tank declared | 84.5 qt · 80.0 L | 77.1 qt · 73.0 L | +10% 80-56 (DT) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
AGRIFULL 80-56 (DT) sources
- Source: Traktorenlexikon, “Agrifull 80-56”
Fiat 566 (DT) sources
- Source: Traktorenlexikon, “Fiat 566/566 DT”