9 material differences · fewer than 12
Tractor oneAGRIFULL 80-56 (DT)1980–1986No measured PTO figureTractor twoFendt Farmer 304 LS1982–1989No measured PTO figure
Which should you choose?
Read our verdict on the 80-56 (DT) and the Farmer 304 LS → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 80-56 (DT) | Farmer 304 LS | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 57.3 hp | 57.1 hp | — |
| Engine declared | MWM D-227-3 | MWM D 226.3.2 | differs |
| Displacement declared | 2.83 L | 3.12 L | +10% Farmer 304 LS |
| Maximum torque declared | 127 lb·ft · 172 N·m | 150 lb·ft · 204 N·m | +19% Farmer 304 LS |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 24.9 mph · 40 km/h | +60% Farmer 304 LS |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Open centre | — |
| Pump flow declared | 5.8 gpm · 22.0 L/min | 10.8 gpm · 40.7 L/min | +85% Farmer 304 LS |
| Rear PTO speeds declared | 540 rpm | 540/750/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,071 lb · 2,300 kg | 6,856 lb · 3,110 kg | +35% Farmer 304 LS |
| Maximum permissible mass declared | — | 10,362 lb · 4,700 kg | — |
| Wheelbase declared | 85.6 in · 2,175 mm | 90.0 in · 2,285 mm | — |
| Length declared | 129.8 in · 3,298 mm | 148.8 in · 3,780 mm | +15% Farmer 304 LS |
| Width declared | 76.0 in · 1,930 mm | 74.2 in · 1,885 mm | — |
| Ground clearance declared | 19.5 in · 495 mm | 17.5 in · 445 mm | +11% 80-56 (DT) |
| Turning radius, braked declared | 12.5 ft · 3.80 m | 13.0 ft · 3.97 m | — |
| Fuel tank declared | 84.5 qt · 80.0 L | 84.5 qt · 80 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
AGRIFULL 80-56 (DT) sources
- Source: Traktorenlexikon, “Agrifull 80-56”
Fendt Farmer 304 LS sources
- Source: Traktorenlexikon, “Fendt Farmer 304 LS”
- Source: Traktorenlexikon, “Fendt Farmer 102 LS/LSA”