13 material differences
Tractor oneAGRIFULL 80-56 (DT)1980–1986No measured PTO figureTractor twoDEUTZ-ALLIS 62601986–1990No measured PTO figure
Which should you choose?
Read our verdict on the 80-56 (DT) and the 6260 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
13 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | 80-56 (DT) | 6260 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 57.3 hp | 57.3 hp | — |
| Engine declared | MWM D-227-3 | KHD F3L 913 | differs |
| Displacement declared | 2.83 L | 3.06 L | +8% 6260 |
| Maximum torque declared | 127 lb·ft · 172 N·m | 144 lb·ft · 195 N·m | +13% 6260 |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 18.6 mph · 30 km/h | +20% 6260 |
| Hydraulics & hitch | |||
| Pump flow declared | 5.8 gpm · 22.0 L/min | 12.5 gpm · 47.5 L/min | +116% 6260 |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,071 lb · 2,300 kg | 6,460 lb · 2,930 kg | +27% 6260 |
| Maximum permissible mass declared | — | 11,023 lb · 5,000 kg | — |
| Wheelbase declared | 85.6 in · 2,175 mm | 79.2 in · 2,012 mm | +8% 80-56 (DT) |
| Length declared | 129.8 in · 3,298 mm | 143.3 in · 3,640 mm | +10% 6260 |
| Width declared | 76.0 in · 1,930 mm | 84.2 in · 2,139 mm | +11% 6260 |
| Ground clearance declared | 19.5 in · 495 mm | 18.0 in · 457 mm | +8% 80-56 (DT) |
| Turning radius, braked declared | 12.5 ft · 3.80 m | 11.8 ft · 3.60 m | +6% 80-56 (DT) |
| Fuel tank declared | 84.5 qt · 80.0 L | 79.3 qt · 75.0 L | +7% 80-56 (DT) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
AGRIFULL 80-56 (DT) sources
Source
- Source: Traktorenlexikon, “Agrifull 80-56”
DEUTZ-ALLIS 6260 sources
Source
- Source: Traktorenlexikon, “Deutz-Allis 6260”
- Source: Traktorenlexikon, “Fendt Farmer 260 S/SA”