AGRIFULL 60 DT or Fendt Farmer 104 S/SA?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 60 DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Farmer 104 S/SA has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Fendt Farmer 104 S/SA suits loader and hydraulic implement work better on this data: 56% (12.2 L/min / 3.2 gpm) more hydraulic flow.
  • The Fendt Farmer 104 S/SA suits road haulage better on this data: 15% (3.7 km/h / 2.3 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for AGRIFULL 60 DT and Fendt Farmer 104 S/SA, with the call on each
Question60 DTFarmer 104 S/SACall
Which puts more power through the PTO shaft?39.7 kW (53.2 hp)Traktorenlexikon, “Agrifull 60”39.5 kW (53.0 hp)Traktorenlexikon, “Fendt Farmer 104 S/SA”Not comparableNot comparable on power at the PTO shaft: the 60 DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Farmer 104 S/SA has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the 60 DT and the Farmer 104 S/SA.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the 60 DT and the Farmer 104 S/SA.
Which pumps more oil for implements?22.0 L/min (5.8 gpm)Traktorenlexikon, “Agrifull 60”34.2 L/min (9.0 gpm)Traktorenlexikon, “Fendt Farmer 104 S/SA”AheadThe Fendt Farmer 104 S/SA has 56% more hydraulic flow (12.2 L/min / 3.2 gpm) than the AGRIFULL 60 DT (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?1,210 kg (2,668 lb)Traktorenlexikon, “Agrifull 60”—No figureNo call on three-point lift: no figure on record for the Farmer 104 S/SA.
Which is heavier, for traction?2,280 kg (5,027 lb)Traktorenlexikon, “Agrifull 60”2,405 kg (5,302 lb) to 2,785 kg (6,140 lb)Traktorenlexikon, “Fendt Farmer 104 S/SA”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?——No figureNo call on maximum permissible mass: no figure on record for the 60 DT and the Farmer 104 S/SA.
Which has the wider choice of gears?8Traktorenlexikon, “Agrifull 60”13Traktorenlexikon, “Fendt Farmer 104 S/SA”AheadThe Fendt Farmer 104 S/SA has 63% more forward gears (5 gears) than the AGRIFULL 60 DT (both forward gears, as stated by the source).
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the 60 DT and the Farmer 104 S/SA.
Which is faster on the road?25 km/h (15.5 mph)Traktorenlexikon, “Agrifull 60”28.7 km/h (17.8 mph)Traktorenlexikon, “Fendt Farmer 104 S/SA”AheadThe Fendt Farmer 104 S/SA has 15% more top speed (3.7 km/h / 2.3 mph) than the AGRIFULL 60 DT (both top speed forward, as stated by the source).
Which offers more PTO speeds?540 rpmTraktorenlexikon, “Agrifull 60”1000Traktorenlexikon, “Fendt Farmer 104 S/SA”DifferPTO speeds differ: the AGRIFULL 60 DT 540 rpm and the Fendt Farmer 104 S/SA 1000 rpm — each offers a speed the other does not; which matters depends on the implement.
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Agrifull 60”independentTraktorenlexikon, “Fendt Farmer 104 S/SA”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Agrifull 60”2WD / 4WDTraktorenlexikon, “Fendt Farmer 104 S/SA”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1976–19771972–1982EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Fendt Farmer 104 S/SA has 56% more hydraulic flow (12.2 L/min / 3.2 gpm) than the AGRIFULL 60 DT (both pump flow, as stated by the source).
  • The Fendt Farmer 104 S/SA has 63% more forward gears (5 gears) than the AGRIFULL 60 DT (both forward gears, as stated by the source).
  • The Fendt Farmer 104 S/SA has 15% more top speed (3.7 km/h / 2.3 mph) than the AGRIFULL 60 DT (both top speed forward, as stated by the source).
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • PTO speeds differ: the AGRIFULL 60 DT 540 rpm and the Fendt Farmer 104 S/SA 1000 rpm — each offers a speed the other does not; which matters depends on the implement.
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the 60 DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Farmer 104 S/SA has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources