AGRIFULL 55 (DT) vs New Holland 4135 (A)

6 material differences · fewer than 12

Tractor one

1987–1991

No measured PTO figure

Tractor two

1996–1999

No measured PTO figure

Which should you choose?

Read our verdict on the 55 (DT) and the 4135 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

6 material differences · 9 fields identical or within 5%, which is not counted as material

AGRIFULL 55 (DT) and New Holland 4135 (A), field by field
Field	55 (DT)	4135 (A)	Gap
Engine
Engine power, claimed claimed	54.3 hp	54.3 hp	—
Engine declared	FIAT-IVECO 8035.06	IVECO 8035.06	differs
Displacement declared	2.71 L	2.71 L	—
Maximum torque declared	130 lb·ft · 176 N·m	130 lb·ft · 176 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	7.1 gpm · 26.8 L/min	9.1 gpm · 34.5 L/min	+29% 4135 (A)
Pressure declared	3,118 psi · 215 bar	3,118 psi · 215 bar	—
Three-point lift at ends declared	—	6,614 lb · 3,000 kg	—
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	4,431 lb · 2,010 kg	5,809 lb · 2,635 kg	+31% 4135 (A)
Maximum permissible mass declared	—	8,488 lb · 3,850 kg	—
Wheelbase declared	80.8 in · 2,052 mm	78.7 in · 1,999 mm	—
Length declared	126.0 in · 3,200 mm	127.6 in · 3,241 mm	—
Width declared	60.6 in · 1,540 mm	60.6 in · 1,540 mm	—
Height declared	92.7 in · 2,355 mm	89.4 in · 2,270 mm	—
Ground clearance declared	19.5 in · 495 mm	18.1 in · 460 mm	+8% 55 (DT)
Turning radius, braked declared	11.8 ft · 3.60 m	—	—
Fuel tank declared	64.5 qt · 61.0 L	77.1 qt · 73.0 L	+20% 4135 (A)

Source

Source