10 material differences · fewer than 12

Tractor oneAGRIFULL 55 (DT)1987–1991No measured PTO figureTractor twoJohn Deere 2155 (A)1987–1992No measured PTO figure

Which should you choose?

Read our verdict on the 55 (DT) and the 2155 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 4 fields identical or within 5%, which is not counted as material

AGRIFULL 55 (DT) and John Deere 2155 (A), field by field
Field	55 (DT)	2155 (A)	Gap
Engine
Engine power, claimed claimed	54.3 hp	54.3 hp	—
Engine declared	FIAT-IVECO 8035.06	John Deere 3.179 DL-017 or DL-001	differs
Displacement declared	2.71 L	2.94 L	+8% 2155 (A)
Maximum torque declared	130 lb·ft · 176 N·m	—	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	—	Pedal-operated dry Fichtel & Sachs single-disc clutch	—
Hydraulics & hitch
Hydraulic centre declared	—	Closed centre	—
Pump flow declared	7.1 gpm · 26.8 L/min	14.0 gpm · 52.9 L/min	+97% 2155 (A)
Pressure declared	3,118 psi · 215 bar	2,321 psi · 160 bar	+34% 55 (DT)
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	4,431 lb · 2,010 kg	5,104 lb · 2,315 kg	+15% 2155 (A)
Wheelbase declared	80.8 in · 2,052 mm	74.4 in · 1,889 mm	+9% 55 (DT)
Length declared	126.0 in · 3,200 mm	132.9 in · 3,375 mm	+5% 2155 (A)
Width declared	60.6 in · 1,540 mm	79.3 in · 2,015 mm	+31% 2155 (A)
Height, over the exhaust declared	92.7 in · 2,355 mm	97.2 in · 2,470 mm	—
Ground clearance declared	19.5 in · 495 mm	14.4 in · 365 mm	+36% 55 (DT)
Turning radius, braked declared	11.8 ft · 3.60 m	—	—
Fuel tank declared	64.5 qt · 61.0 L	70.8 qt · 67.0 L	+10% 2155 (A)

Source

Source