8 material differences · fewer than 12
Tractor oneAGRIFULL 55 (DT)1987–1991No measured PTO figureTractor twoFiat 55-56 LM (DT)from 1988No measured PTO figure
Which should you choose?
Read our verdict on the 55 (DT) and the 55-56 LM (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 7 fields identical or within 5%, which is not counted as material
| Field | 55 (DT) | 55-56 LM (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 54.3 hp | 54.2 hp | — |
| Engine declared | FIAT-IVECO 8035.06 | Fiat 8035.06.206 or 307 | differs |
| Displacement declared | 2.71 L | 2.71 L | — |
| Maximum torque declared | 130 lb·ft · 176 N·m | 128 lb·ft · 173 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5–18.6 mph · 25–30 km/h | differs |
| Clutch declared | — | Dry LuK or Valeo double clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Open centre | — |
| Pump flow declared | 7.1 gpm · 26.8 L/min | 8.7 gpm · 32.8 L/min | +22% 55-56 LM (DT) |
| Pressure declared | 3,118 psi · 215 bar | 3,046 psi · 210 bar | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 4,431 lb · 2,010 kg | 4,718 lb · 2,140 kg | +6% 55-56 LM (DT) |
| Wheelbase declared | 80.8 in · 2,052 mm | 80.8 in · 2,052 mm | — |
| Length declared | 126.0 in · 3,200 mm | 137.0 in · 3,480 mm | +9% 55-56 LM (DT) |
| Width declared | 60.6 in · 1,540 mm | 67.7–87.4 in · 1,720–2,220 mm | differs |
| Ground clearance declared | 19.5 in · 495 mm | 17.7 in · 450 mm | +10% 55 (DT) |
| Turning radius, braked declared | 11.8 ft · 3.60 m | 10.6 ft · 3.23 m | +11% 55 (DT) |
| Fuel tank declared | 64.5 qt · 61.0 L | 63.4 qt · 60.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
AGRIFULL 55 (DT) sources
- Source: Traktorenlexikon, “Agrifull 55”
- Source: Traktorenlexikon, “Fiat 50-66/50-66 DT”
Fiat 55-56 LM (DT) sources
- Source: Traktorenlexikon, “Fiatagri 55-56 LM (DT)”