9 material differences · fewer than 12
Tractor oneAGRIFULL 350-C (CL/Compact/S)1976–1977No measured PTO figureTractor twoSAME Explorer 55 (DT)1983–1986No measured PTO figure
Which should you choose?
Read our verdict on the 350-C (CL/Compact/S) and the Explorer 55 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 350-C (CL/Compact/S) | Explorer 55 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 54.3 hp | 54.3 hp | — |
| Engine declared | V.M.-MOTORI 103 | SAME 916.3 A | differs |
| Displacement declared | 2.59 L | 2.75 L | +6% Explorer 55 (DT) |
| Maximum torque declared | — | 131 lb·ft · 177 N·m | — |
| Transmission | |||
| Top speed declared | 6.2 mph · 10 km/h | 18.6 mph · 30 km/h | +200% Explorer 55 (DT) |
| Hydraulics & hitch | |||
| Hydraulic control declared | — | Load sensing | — |
| Pump flow declared | 5.3 gpm · 20.0 L/min | 7.7 gpm · 29.0 L/min | +45% Explorer 55 (DT) |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 5,379 lb · 2,440 kg | 5,600 lb · 2,540 kg | — |
| Wheelbase declared | 54.3 in · 1,380 mm | 86.4 in · 2,195 mm | +59% Explorer 55 (DT) |
| Length declared | 86.6 in · 2,200 mm | 138.6 in · 3,520 mm | +60% Explorer 55 (DT) |
| Width declared | 45.2 in · 1,147 mm | 72.0–95.6 in · 1,828–2,428 mm | differs |
| Ground clearance declared | 11.0 in · 280 mm | 17.1 in · 435 mm | +55% Explorer 55 (DT) |
| Turning radius, braked declared | — | 11.0 ft · 3.35 m | — |
| Fuel tank declared | 47.6 qt · 45.0 L | 70.8 qt · 67.0 L | +49% Explorer 55 (DT) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
AGRIFULL 350-C (CL/Compact/S) sources
- Source: Traktorenlexikon, “Agrifull 350 C”
- Source: Traktorenlexikon, “Agrifull 345 C”
SAME Explorer 55 (DT) sources
- Source: Traktorenlexikon, “SAME Explorer 55”