AGRIFULL 345-C (S) or Ford 3610?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 345-C (S) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 3610 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Ford 3610 suits loader and hydraulic implement work better on this data: 37% (7.4 L/min / 2.0 gpm) more hydraulic flow.
  • The Ford 3610 suits road haulage better on this data: 200% (20.0 km/h / 12.4 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for AGRIFULL 345-C (S) and Ford 3610, with the call on each
Question345-C (S)3610Call
Which puts more power through the PTO shaft?34.6 kW (46.4 hp)Traktorenlexikon, “Agrifull 345 C”34.6 kW (46.4 hp)Traktorenlexikon, “Ford 3610”Not comparableNot comparable on power at the PTO shaft: the 345-C (S) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 3610 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the 345-C (S) and the 3610.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the 345-C (S) and the 3610.
Which pumps more oil for implements?20.0 L/min (5.3 gpm)Traktorenlexikon, “Agrifull 345 C”27.4 L/min (7.2 gpm)Traktorenlexikon, “Ford 3610”AheadThe Ford 3610 has 37% more hydraulic flow (7.4 L/min / 2.0 gpm) than the AGRIFULL 345-C (S) (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?—1,413 kg (3,115 lb)Traktorenlexikon, “Ford 3610”No figureNo call on three-point lift: no figure on record for the 345-C (S).
Which is heavier, for traction?2,400 kg (5,291 lb)Traktorenlexikon, “Agrifull 345 C”2,420 kg (5,335 lb)Traktorenlexikon, “Ford 3610”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?——No figureNo call on maximum permissible mass: no figure on record for the 345-C (S) and the 3610.
Which has the wider choice of gears?8Traktorenlexikon, “Agrifull 345 C”8Traktorenlexikon, “Ford 3610”EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the 345-C (S) and the 3610.
Which is faster on the road?10 km/h (6.2 mph)Traktorenlexikon, “Agrifull 345 C”30 km/h (18.6 mph)Traktorenlexikon, “Ford 3610”AheadThe Ford 3610 has 200% more top speed (20.0 km/h / 12.4 mph) than the AGRIFULL 345-C (S) (both top speed forward, as stated by the source).
Which offers more PTO speeds?540 rpmTraktorenlexikon, “Agrifull 345 C”540 rpmTraktorenlexikon, “Ford 3610”EvenEven on PTO speeds: the same speeds (540 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Agrifull 345 C”independentTraktorenlexikon, “Ford 3610”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?TracksTraktorenlexikon, “Agrifull 345 C”Two-wheel or four-wheel driveTraktorenlexikon, “Ford 3610”DifferDrive differs: the AGRIFULL 345-C (S) Tracks and the Ford 3610 Two-wheel or four-wheel drive — tracks and wheels are different kinds of running gear, not called.
Which is newer, and what about parts?1976–19771981–1983Ahead (a fact, not an advantage)The Ford 3610 is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Ford 3610 has 37% more hydraulic flow (7.4 L/min / 2.0 gpm) than the AGRIFULL 345-C (S) (both pump flow, as stated by the source).
  • The Ford 3610 has 200% more top speed (20.0 km/h / 12.4 mph) than the AGRIFULL 345-C (S) (both top speed forward, as stated by the source).
  • The Ford 3610 is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
  • Even on PTO speeds: the same speeds (540 rpm).
  • Even on PTO independence: every PTO is independent.
  • Drive differs: the AGRIFULL 345-C (S) Tracks and the Ford 3610 Two-wheel or four-wheel drive — tracks and wheels are different kinds of running gear, not called.
  • Not comparable on power at the PTO shaft: the 345-C (S) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 3610 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources