AGRIFULL 345-C (S) or Ford 3600 (A)?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the 345-C (S) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 3600 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Ford 3600 (A) suits loader and hydraulic implement work better on this data: 57% (11.4 L/min / 3.0 gpm) more hydraulic flow.
- The Ford 3600 (A) suits road haulage better on this data: 200% (20.0 km/h / 12.4 mph) more top speed.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 345-C (S) | 3600 (A) | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 34.6 kW (46.4 hp)Traktorenlexikon, “Agrifull 345 C” | 34.6 kW (46.4 hp)Traktorenlexikon, “Ford 3600” | Not comparableNot comparable on power at the PTO shaft: the 345-C (S) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 3600 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 345-C (S) and the 3600 (A). |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 345-C (S) and the 3600 (A). |
| Which pumps more oil for implements? | 20.0 L/min (5.3 gpm)Traktorenlexikon, “Agrifull 345 C” | 31.4 L/min (8.3 gpm)Traktorenlexikon, “Ford 3600” | AheadThe Ford 3600 (A) has 57% more hydraulic flow (11.4 L/min / 3.0 gpm) than the AGRIFULL 345-C (S) (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | — | 1,270 kg (2,800 lb)Traktorenlexikon, “Ford 3600” | No figureNo call on three-point lift: no figure on record for the 345-C (S). |
| Which is heavier, for traction? | 2,400 kg (5,291 lb)Traktorenlexikon, “Agrifull 345 C” | 1,810 kg (3,990 lb)Traktorenlexikon, “Ford 3600” | Ahead (a fact, not an advantage)The AGRIFULL 345-C (S) is 33% heavier (590 kg / 1,301 lb) than the Ford 3600 (A) (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the 345-C (S) and the 3600 (A). |
| Which has the wider choice of gears? | 8Traktorenlexikon, “Agrifull 345 C” | 8Traktorenlexikon, “Ford 3600” | EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 345-C (S) and the 3600 (A). |
| Which is faster on the road? | 10 km/h (6.2 mph)Traktorenlexikon, “Agrifull 345 C” | 30 km/h (18.6 mph)Traktorenlexikon, “Ford 3600” | AheadThe Ford 3600 (A) has 200% more top speed (20.0 km/h / 12.4 mph) than the AGRIFULL 345-C (S) (both top speed forward, as stated by the source). |
| Which offers more PTO speeds? | 540 rpmTraktorenlexikon, “Agrifull 345 C” | 540 rpmTraktorenlexikon, “Ford 3600” | EvenEven on PTO speeds: the same speeds (540 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Agrifull 345 C” | independentTraktorenlexikon, “Ford 3600” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | TracksTraktorenlexikon, “Agrifull 345 C” | Two-wheel or four-wheel driveTraktorenlexikon, “Ford 3600” | DifferDrive differs: the AGRIFULL 345-C (S) Tracks and the Ford 3600 (A) Two-wheel or four-wheel drive — tracks and wheels are different kinds of running gear, not called. |
| Which is newer, and what about parts? | 1976–1977 | 1981–1993 | Ahead (a fact, not an advantage)The Ford 3600 (A) is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Ford 3600 (A) has 57% more hydraulic flow (11.4 L/min / 3.0 gpm) than the AGRIFULL 345-C (S) (both pump flow, as stated by the source).
- The AGRIFULL 345-C (S) is 33% heavier (590 kg / 1,301 lb) than the Ford 3600 (A) (both unladen weight, as stated by the source).
- The Ford 3600 (A) has 200% more top speed (20.0 km/h / 12.4 mph) than the AGRIFULL 345-C (S) (both top speed forward, as stated by the source).
- The Ford 3600 (A) is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.
- Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
- Even on PTO speeds: the same speeds (540 rpm).
- Even on PTO independence: every PTO is independent.
- Drive differs: the AGRIFULL 345-C (S) Tracks and the Ford 3600 (A) Two-wheel or four-wheel drive — tracks and wheels are different kinds of running gear, not called.
- Not comparable on power at the PTO shaft: the 345-C (S) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 3600 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass and a creeper range.
← Every figure for both machines, side by side, with sources