9 material differences · fewer than 12
Tractor oneAGRIFULL 340-C (S)1976–1977No measured PTO figureTractor twoZETOR 49111977–1980No measured PTO figure
Which should you choose?
Read our verdict on the 340-C (S) and the 4911 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 340-C (S) | 4911 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 44.4 hp | 44.4 hp | — |
| Engine declared | V.M.-MOTORI 395 | ZBROJORKA Z-4901 | differs |
| Displacement declared | 2.02 L | 2.70 L | +33% 4911 |
| Maximum torque declared | — | 105 lb·ft · 143 N·m | — |
| Transmission | |||
| Top speed declared | 6.2 mph · 10 km/h | 15.5 mph · 25 km/h | +150% 4911 |
| Clutch declared | Hand lever operated dry single disc clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 5.3 gpm · 20.0 L/min | 6.6 gpm · 24.8 L/min | +24% 4911 |
| Pressure declared | — | 3,046 psi · 210 bar | — |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,027 lb · 2,280 kg | 4,784 lb · 2,170 kg | — |
| Wheelbase declared | 47.2 in · 1,200 mm | 78.3 in · 1,988 mm | +66% 4911 |
| Length declared | 86.6 in · 2,200 mm | 129.5 in · 3,290 mm | +50% 4911 |
| Width declared | 45.2 in · 1,147 mm | 70.1–85.8 in · 1,780–2,180 mm | differs |
| Ground clearance declared | 11.0 in · 280 mm | 18.9 in · 480 mm | +71% 4911 |
| Turning radius, braked declared | — | 9.7 ft · 2.95 m | — |
| Fuel tank declared | 47.6 qt · 45.0 L | 49.7 qt · 47.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
AGRIFULL 340-C (S) sources
- Source: Traktorenlexikon, “Agrifull 340 C”
ZETOR 4911 sources
- Source: Traktorenlexikon, “Zetor 4911”