10 material differences · fewer than 12
Tractor oneAGRIFULL 340-C (S)1976–1977No measured PTO figureTractor twoSOMECA 450 Special (TD)1978–1982No measured PTO figure
Which should you choose?
Read our verdict on the 340-C (S) and the 450 Special (TD) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 340-C (S) | 450 Special (TD) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 44.4 hp | 44.4 hp | — |
| Engine declared | V.M.-MOTORI 395 | FIAT-IVECO 8035.01.309 | differs |
| Displacement declared | 2.02 L | 2.34 L | +16% 450 Special (TD) |
| Maximum torque declared | — | 108 lb·ft · 146 N·m | — |
| Transmission | |||
| Top speed declared | 6.2 mph · 10 km/h | 15.5 mph · 25 km/h | +150% 450 Special (TD) |
| Clutch declared | Hand lever operated dry single disc clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 5.3 gpm · 20.0 L/min | 6.2 gpm · 23.4 L/min | +17% 450 Special (TD) |
| Pressure declared | — | 2,843 psi · 196 bar | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 5,027 lb · 2,280 kg | 4,079 lb · 1,850 kg | +23% 340-C (S) |
| Wheelbase declared | 47.2 in · 1,200 mm | 76.9 in · 1,953 mm | +63% 450 Special (TD) |
| Length declared | 86.6 in · 2,200 mm | 127.3 in · 3,233 mm | +47% 450 Special (TD) |
| Width declared | 45.2 in · 1,147 mm | 60.8–88.4 in · 1,545–2,245 mm | differs |
| Ground clearance declared | 11.0 in · 280 mm | 14.6 in · 370 mm | +32% 450 Special (TD) |
| Turning radius, braked declared | — | 9.7 ft · 2.95 m | — |
| Fuel tank declared | 47.6 qt · 45.0 L | 57.1 qt · 54.0 L | +20% 450 Special (TD) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
AGRIFULL 340-C (S) sources
- Source: Traktorenlexikon, “Agrifull 340 C”
SOMECA 450 Special (TD) sources
- Source: Traktorenlexikon, “Someca 450 S”