AGRIFULL 340-C (S) or SOMECA 440 (TD)?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the 340-C (S) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 440 (TD) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The SOMECA 440 (TD) suits loader and hydraulic implement work better on this data: 34% (6.8 L/min / 1.8 gpm) more hydraulic flow.
- The SOMECA 440 (TD) suits road haulage better on this data: 150% (15.0 km/h / 9.3 mph) more top speed.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 340-C (S) | 440 (TD) | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 33.1 kW (44.4 hp)Traktorenlexikon, “Agrifull 340 C” | 33.1 kW (44.4 hp)Traktorenlexikon, “Someca 440” | Not comparableNot comparable on power at the PTO shaft: the 340-C (S) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 440 (TD) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 340-C (S) and the 440 (TD). |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 340-C (S) and the 440 (TD). |
| Which pumps more oil for implements? | 20.0 L/min (5.3 gpm)Traktorenlexikon, “Agrifull 340 C” | 26.8 L/min (7.1 gpm)Traktorenlexikon, “Someca 440” | AheadThe SOMECA 440 (TD) has 34% more hydraulic flow (6.8 L/min / 1.8 gpm) than the AGRIFULL 340-C (S) (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | — | 1,750 kg (3,858 lb)Traktorenlexikon, “Someca 440” | No figureNo call on three-point lift: no figure on record for the 340-C (S). |
| Which is heavier, for traction? | 2,280 kg (5,027 lb)Traktorenlexikon, “Agrifull 340 C” | 1,900 kg (4,189 lb)Traktorenlexikon, “Someca 440” | Ahead (a fact, not an advantage)The AGRIFULL 340-C (S) is 20% heavier (380 kg / 838 lb) than the SOMECA 440 (TD) (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the 340-C (S) and the 440 (TD). |
| Which has the wider choice of gears? | 8Traktorenlexikon, “Agrifull 340 C” | 8 to 12Traktorenlexikon, “Someca 440” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 340-C (S) and the 440 (TD). |
| Which is faster on the road? | 10 km/h (6.2 mph)Traktorenlexikon, “Agrifull 340 C” | 25 km/h (15.5 mph)Traktorenlexikon, “Someca 440” | AheadThe SOMECA 440 (TD) has 150% more top speed (15.0 km/h / 9.3 mph) than the AGRIFULL 340-C (S) (both top speed forward, as stated by the source). |
| Which offers more PTO speeds? | 540 rpmTraktorenlexikon, “Agrifull 340 C” | 540 rpmTraktorenlexikon, “Someca 440” | EvenEven on PTO speeds: the same speeds (540 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Agrifull 340 C” | — | No figureNo call on PTO independence: not stated for the 440 (TD). |
| Which drives on both axles? | TracksTraktorenlexikon, “Agrifull 340 C” | Two-wheel or four-wheel driveTraktorenlexikon, “Someca 440” | DifferDrive differs: the AGRIFULL 340-C (S) Tracks and the SOMECA 440 (TD) Two-wheel or four-wheel drive — tracks and wheels are different kinds of running gear, not called. |
| Which is newer, and what about parts? | 1976–1977 | 1982 | Ahead (a fact, not an advantage)The SOMECA 440 (TD) is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The SOMECA 440 (TD) has 34% more hydraulic flow (6.8 L/min / 1.8 gpm) than the AGRIFULL 340-C (S) (both pump flow, as stated by the source).
- The AGRIFULL 340-C (S) is 20% heavier (380 kg / 838 lb) than the SOMECA 440 (TD) (both unladen weight, as stated by the source).
- The SOMECA 440 (TD) has 150% more top speed (15.0 km/h / 9.3 mph) than the AGRIFULL 340-C (S) (both top speed forward, as stated by the source).
- The SOMECA 440 (TD) is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540 rpm).
- Drive differs: the AGRIFULL 340-C (S) Tracks and the SOMECA 440 (TD) Two-wheel or four-wheel drive — tracks and wheels are different kinds of running gear, not called.
- Not comparable on power at the PTO shaft: the 340-C (S) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 440 (TD) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources