AGRIFULL 340-C (S) vs Fiat 440 (DT)
12 material differences
Which should you choose?
Read our verdict on the 340-C (S) and the 440 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
12 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 340-C (S) | 440 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 44.4 hp | 44.4 hp | — |
| Engine declared | V.M.-MOTORI 395 | FIAT-IVECO 8035.02 | differs |
| Displacement declared | 2.02 L | 2.59 L | +28% 440 (DT) |
| Maximum torque declared | — | 114 lb·ft · 154 N·m | — |
| Transmission | |||
| Top speed declared | 6.2 mph · 10 km/h | 15.5 mph · 25 km/h | +150% 440 (DT) |
| Clutch declared | Hand lever operated dry single disc clutch | dry FEREDO double clutch type 11/11" | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 5.3 gpm · 20.0 L/min | 7.1 gpm · 26.8 L/min | +34% 440 (DT) |
| Pressure declared | — | 2,843 psi · 196 bar | — |
| Three-point lift at ends declared | — | 3,858 lb · 1,750 kg | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 5,027 lb · 2,280 kg | 4,189 lb · 1,900 kg | +20% 340-C (S) |
| Wheelbase declared | 47.2 in · 1,200 mm | 76.8 in · 1,950 mm | +63% 440 (DT) |
| Length declared | 86.6 in · 2,200 mm | 126.8 in · 3,220 mm | +46% 440 (DT) |
| Width declared | 45.2 in · 1,147 mm | 65.0 in · 1,650 mm | +44% 440 (DT) |
| Height declared | 42.9 in · 1,090 mm | 89.8 in · 2,280 mm | +109% 440 (DT) |
| Ground clearance declared | 11.0 in · 280 mm | 13.8 in · 350 mm | +25% 440 (DT) |
| Turning radius, braked declared | — | 9.7 ft · 2.95 m | — |
| Fuel tank declared | 47.6 qt · 45.0 L | 57.1 qt · 54.0 L | +20% 440 (DT) |
AGRIFULL 340-C (S) sources
Source
- Source: Traktorenlexikon, “Agrifull 340 C”
Fiat 440 (DT) sources
Source
- Source: Traktorenlexikon, “Fiat 440/440 DT”
- Source: Traktorenlexikon, “Someca 440”