13 material differences
Tractor oneAgco RT-952002–2004No measured PTO figureTractor twoNew Holland T-40502008–2014No measured PTO figure
Which should you choose?
Read our verdict on the RT-95 and the T-4050 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
13 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | RT-95 | T-4050 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 95.6 hp | 95.6 hp | — |
| Engine declared | CUMMINS 6 BT-5.9 | IVECO F4 CE 9484 M (Tier-III) | differs |
| Displacement declared | 5.88 L | 4.49 L | +31% RT-95 |
| Maximum torque declared | 325 lb·ft · 440 N·m | 305 lb·ft · 413 N·m | +7% RT-95 |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | Pedal-operated wet VALEO multi-disc clutch, five discs with 250 mm diameter | — | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 29.4 gpm · 111.3 L/min | 16.9 gpm · 63.8 L/min | +74% RT-95 |
| Pressure declared | 3,336 psi · 230 bar | 3,263 psi · 225 bar | — |
| Three-point lift, at the coupling points declared | 7,361 lb · 3,339 kg | 6,393 lb · 2,900 kg | +15% RT-95 |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 10,399 lb · 4,717 kg | 8,289 lb · 3,760 kg | +25% RT-95 |
| Maximum permissible mass declared | — | 11,574 lb · 5,250 kg | — |
| Wheelbase declared | 107.8 in · 2,739 mm | 86.0 in · 2,185 mm | +25% RT-95 |
| Length declared | 173.0 in · 4,394 mm | 140.9 in · 3,580 mm | +23% RT-95 |
| Width declared | 113.4 in · 2,880 mm | 73.5–95.6 in · 1,867–2,428 mm | differs |
| Ground clearance declared | 18.1 in · 460 mm | 15.0 in · 380 mm | +21% RT-95 |
| Fuel tank declared | 169.1 qt · 160.0 L | 93.0 qt · 88.0 L | +82% RT-95 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Agco RT-95 sources
Source
- Source: Traktorenlexikon, “AGCO RT 95”
- Source: Traktorenlexikon, “White 6124”
New Holland T-4050 sources
Source
- Source: Traktorenlexikon, “New Holland T 4050”