8 material differences · fewer than 12
Tractor oneAgco RT-1502004–2005No measured PTO figureTractor twoFendt 815 Vario / TMS2003–2009No measured PTO figure
Which should you choose?
Read our verdict on the RT-150 and the 815 Vario / TMS → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | RT-150 | 815 Vario / TMS | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 147.9 hp | 148 hp | — |
| Engine declared | CUMMINS 6 BTA 6.7 | Deutz BF6M 2013 C | differs |
| Displacement declared | 6.83 L | 5.70 L | +20% RT-150 |
| Maximum torque declared | 551 lb·ft · 747 N·m | 538 lb·ft · 730 N·m | — |
| Transmission | |||
| Top speed declared | 24.9–31.1 mph · 40–50 km/h | 31.1 mph · 50 km/h | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | — | — |
| Hydraulic control declared | Load sensing | Load sensing | — |
| Pump flow declared | 30.0 gpm · 113.6 L/min | 29.1 gpm · 110.0 L/min | — |
| Pressure declared | 3,336 psi · 230 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/750/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 16,416 lb · 7,446 kg | 14,661 lb · 6,650 kg | +12% RT-150 |
| Maximum permissible mass declared | — | 27,558 lb · 12,500 kg | — |
| Wheelbase declared | 113.8 in · 2,891 mm | 107.1 in · 2,720 mm | +6% RT-150 |
| Length declared | 188.6 in · 4,790 mm | 185.0 in · 4,700 mm | — |
| Width declared | 104.3 in · 2,650 mm | 100.4 in · 2,550 mm | — |
| Ground clearance declared | 17.9 in · 455 mm | 22.4 in · 570 mm | +25% 815 Vario / TMS |
| Turning radius, braked declared | — | 16.7 ft · 5.10 m | — |
| Fuel tank declared | 399.4 qt · 378.0 L | 359.3 qt · 340 L | +11% RT-150 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Agco RT-150 sources
- Source: Traktorenlexikon, “AGCO RT 150”
- Source: Traktorenlexikon, “AGCO RT 100”
Fendt 815 Vario / TMS sources
- Source: Traktorenlexikon, “Fendt 815 Vario”
- Source: Traktorenlexikon, “Fendt Favorit 714 Vario”