Agco RT-140 A vs Massey Ferguson MF 8240 A

8 material differences · fewer than 12

Tractor one

2006–2011

No measured PTO figure

Tractor two

1999–2002

No measured PTO figure

Which should you choose?

Read our verdict on the RT-140 A and the MF 8240 A → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 9 fields identical or within 5%, which is not counted as material

Agco RT-140 A and Massey Ferguson MF 8240 A, field by field
Field	RT-140 A	MF 8240 A	Gap
Engine
Engine power, claimed claimed	164.7 hp	167.8 hp	—
Engine declared	SISU-DIESEL 66 CTA-4V	VALMET 620 DSBAE	differs
Displacement declared	6.60 L	6.60 L	—
Maximum torque declared	595 lb·ft · 807 N·m	493 lb·ft · 669 N·m	+21% RT-140 A
Transmission
Top speed declared	24.9 mph · 40 km/h	24.9 mph · 40 km/h	—
Clutch declared	Pedal operated electrohydraulic VALEO multi disc clutch	Pedal operated hydraulic VALEO multi-plate clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Hydraulic control declared	Load sensing	—	—
Pump flow declared	30.5 gpm · 115.6 L/min	30.9 gpm · 116.8 L/min	—
Pressure declared	3,336 psi · 230 bar	3,336 psi · 230 bar	—
Three-point lift at ends declared	13,916 lb · 6,312 kg	19,334 lb · 8,770 kg	+39% MF 8240 A
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	16,303 lb · 7,395 kg	15,388 lb · 6,980 kg	+6% RT-140 A
Maximum permissible mass declared	—	26,455 lb · 12,000 kg	—
Wheelbase declared	118.0 in · 2,996 mm	118.0 in · 2,997 mm	—
Length declared	196.0 in · 4,978 mm	199.3 in · 5,063 mm	—
Width declared	79.1 in · 2,009 mm	84.2 in · 2,138 mm	+6% MF 8240 A
Height declared	119.0 in · 3,023 mm	126.0 in · 3,200 mm	+6% MF 8240 A
Ground clearance declared	22.4 in · 570 mm	21.7 in · 550 mm	—
Fuel tank declared	399.4 qt · 378.0 L	433.2 qt · 410 L	+8% MF 8240 A

Source

Source