Agco RT-140 A vs Hürlimann H-6165 Master

8 material differences · fewer than 12

Tractor one

2006–2011

No measured PTO figure

Tractor two

1991–2001

No measured PTO figure

Which should you choose?

Read our verdict on the RT-140 A and the H-6165 Master → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 7 fields identical or within 5%, which is not counted as material

Agco RT-140 A and Hürlimann H-6165 Master, field by field
Field	RT-140 A	H-6165 Master	Gap
Engine
Engine power, claimed claimed	164.7 hp	161.7 hp	—
Engine declared	SISU-DIESEL 66 CTA-4V	SAME-LAMBORGHINI-HÜRLIMANN 1000.6 WTI	differs
Displacement declared	6.60 L	6.00 L	+10% RT-140 A
Maximum torque declared	595 lb·ft · 807 N·m	467 lb·ft · 633 N·m	+27% RT-140 A
Transmission
Top speed declared	24.9 mph · 40 km/h	24.9 mph · 40 km/h	—
Clutch declared	Pedal operated electrohydraulic VALEO multi disc clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Hydraulic control declared	Load sensing	Load sensing	—
Pump flow declared	30.5 gpm · 115.6 L/min	15.2 gpm · 57.5 L/min	+101% RT-140 A
Pressure declared	3,336 psi · 230 bar	—	—
Three-point lift at ends declared	13,916 lb · 6,312 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	16,303 lb · 7,395 kg	12,853 lb · 5,830 kg	+27% RT-140 A
Maximum permissible mass declared	—	18,739 lb · 8,500 kg	—
Wheelbase declared	118.0 in · 2,996 mm	112.2 in · 2,850 mm	—
Length declared	196.0 in · 4,978 mm	187.0 in · 4,750 mm	—
Width declared	79.1 in · 2,009 mm	88.2 in · 2,240 mm	+11% H-6165 Master
Height declared	119.0 in · 3,023 mm	113.4 in · 2,880 mm	—
Ground clearance declared	22.4 in · 570 mm	20.3 in · 515 mm	+11% RT-140 A
Turning radius, braked declared	—	12.8 ft · 3.90 m	—
Fuel tank declared	399.4 qt · 378.0 L	243.0 qt · 230.0 L	+64% RT-140 A

Source

Source