11 material differences · fewer than 12

Tractor oneAgco RT-140 A2006–2011No measured PTO figureTractor twoFendt 817 Vario-TMS2003–2009No measured PTO figure

Which should you choose?

Read our verdict on the RT-140 A and the 817 Vario-TMS → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

11 material differences · 5 fields identical or within 5%, which is not counted as material

Agco RT-140 A and Fendt 817 Vario-TMS, field by field
FieldRT-140 A817 Vario-TMSGap
Engine
Engine power, claimed claimed164.7 hp162 hp—
Engine declaredSISU-DIESEL 66 CTA-4VDeutz BF6M 2013 Cdiffers
Displacement declared6.60 L5.70 L+16% RT-140 A
Maximum torque declared595 lb·ft · 807 N·m575 lb·ft · 780 N·m—
Transmission
Top speed declared24.9 mph · 40 km/h31.1 mph · 50 km/h+25% 817 Vario-TMS
Clutch declaredPedal operated electrohydraulic VALEO multi disc clutchMulti-disc clutchdiffers
Hydraulics & hitch
Hydraulic centre declaredClosed centre——
Hydraulic control declaredLoad sensingLoad sensing—
Pump flow declared30.5 gpm · 115.6 L/min29.1 gpm · 110.0 L/min—
Pressure declared3,336 psi · 230 bar2,901 psi · 200 bar+15% RT-140 A
Rear PTO speeds declared540/1000 rpm540 rpm / 750 rpm / 1000 rpmdiffers
Weight & dimensions
Unladen weight declared16,303 lb · 7,395 kg14,661 lb · 6,650 kg+11% RT-140 A
Maximum permissible mass declared—27,558 lb · 12,500 kg—
Wheelbase declared118.0 in · 2,996 mm107.1 in · 2,720 mm+10% RT-140 A
Length declared196.0 in · 4,978 mm185.0 in · 4,700 mm+6% RT-140 A
Width declared79.1–100.2 in · 2,009–2,545 mm100.4 in · 2,550 mmdiffers
Ground clearance declared22.4 in · 570 mm22.4 in · 570 mm—
Turning radius, braked declared—16.7 ft · 5.10 m—
Fuel tank declared399.4 qt · 378.0 L359.3 qt · 340 L+11% RT-140 A

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Agco RT-140 A sources

Source
  • Source: Traktorenlexikon, “AGCO RT 140 A”
  • Source: Traktorenlexikon, “AGCO RT 100 A”

Fendt 817 Vario-TMS sources

Source
  • Source: Traktorenlexikon, “Fendt 817 Vario”
  • Source: Traktorenlexikon, “Fendt Favorit 714 Vario”