Agco RT-135 vs VALMET 8350

10 material differences · fewer than 12

Tractor one

2004–2005

No measured PTO figure

Tractor two

1998–2004

No measured PTO figure

Which should you choose?

Read our verdict on the RT-135 and the 8350 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 5 fields identical or within 5%, which is not counted as material

Agco RT-135 and VALMET 8350, field by field
Field	RT-135	8350	Gap
Engine
Engine power, claimed claimed	133.2 hp	133.2 hp	—
Engine declared	CUMMINS 6 BTA 6.7	VALMET 620 DSRIE	differs
Displacement declared	6.83 L	6.59 L	—
Maximum torque declared	530 lb·ft · 719 N·m	471 lb·ft · 639 N·m	+13% RT-135
Transmission
Top speed declared	24.9–31.1 mph · 40–50 km/h	24.9–31.1 mph · 40–50 km/h	—
Clutch declared	—	pedal-operated dry Fichtel & Sachs single-disc clutch	—
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Hydraulic control declared	Load sensing	—	—
Pump flow declared	30.6 gpm · 115.8 L/min	20.2 gpm · 76.4 L/min	+52% RT-135
Pressure declared	3,336 psi · 230 bar	3,046 psi · 210 bar	+10% RT-135
Three-point lift at ends declared	—	14,991 lb · 6,800 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	15,525 lb · 7,042 kg	14,308 lb · 6,490 kg	+9% RT-135
Maximum permissible mass declared	—	19,842 lb · 9,000 kg	—
Wheelbase declared	113.8 in · 2,891 mm	100.7 in · 2,558 mm	+13% RT-135
Length declared	198.0 in · 5,030 mm	225.2 in · 5,720 mm	+14% 8350
Width declared	104.3 in · 2,650 mm	84.8 in · 2,155 mm	+23% RT-135
Height declared	120.1 in · 3,050 mm	111.2 in · 2,825 mm	+8% RT-135
Ground clearance declared	18.5 in · 470 mm	18.1 in · 460 mm	—
Fuel tank declared	399.4 qt · 378.0 L	174.4 qt · 165.0 L	+129% RT-135

Source

Source